Abstract:Incorporating a polymer dielectric blend with amine‐functionalized units facilitates low voltage operation of bispentafluorophenoxy silicon phthalocyanine in organic thin film transistors (OTFTs) while maintaining high charge mobility. Low‐cost and high‐performance electronics based on synthetically simple materials are required to fuel the deployment of smart packaging and wearable electronics. Metal phthalocyanines (MPcs) are promising semiconductors for use in n‐type organic thin film transistors (OTFTs) but often require high operating voltages. The first silicon phthalocyanine‐based OTFT with a polymer dielectric is reported as an alternative to traditional metal oxide dielectrics. Incorporating poly(methyl methacrylate) (PMMA) as the dielectric successfully reduces the threshold voltage (VT) of bispentafluorophenoxy SiPc (F10‐SiPc) from 14.9V to 7.3V while retaining high mobility. Further reduction in VT is obtained by using copolymers and blends of PMMA and dimethylamino ethyl methacrylate (DMAEMA)‐containing polymers, where a higher molar fraction of DMAEMA leads to a consistent drop in VT to ‐0.7 V. The electron‐donating groups of the tertiary amines in the DMAEMA show clear interfacial doping of the semiconductor, reducing the voltage required to populate the dielectric/semiconductor interface with charge carriers and turn on the device. Blending trace amounts of DMAEMA‐containing copolymers with PMMA proves to be an effective strategy for reducing the VT while keeping the charge mobility high, unlike when using pure copolymers with elevated DMAEMA content. Time of flight secondary ion mass spectroscopy (ToF‐SIMS) and X‐ray photoelectron spectroscopy (XPS) demonstrate that the DMAEMA‐containing copolymer is floating to the surface of the PMMA blend at the dielectric–semiconductor interface, which explains the reduced VT. Synchrotron scanning transmission X‐ray microscopy (STXM) demonstrates that PMMA promotes a more edge‐on orientation of F10‐SiPc films, compared to the more face‐on orientation when deposited on the DMAEMA containing copolymer. This study demonstrates a straightforward process for designing dielectric polymers and their blends for the reduction in VT for n‐type OTFTs.

Polymer Electrolyte Blend Gate Dielectrics for High-Performance Ultrathin Organic Transistors: Toward Favorable Polymer Blend Miscibility and Reliability

Organic-semiconductor: Polymer-electret Blends for High-Performance Transistors

Interfacial Charge Transport Enhancement of Liquid‐Crystalline Polymer Transistors Enabled by Ionic Polyurethane Dielectric

Solution-processed Organic Field-Effect Transistors with Cross-Linked Poly(4-Vinylphenol)/polyvinyl Alcohol Bilayer Dielectrics

Compromise of Electrical Leakage and Capacitance Density Effects: a Facile Route for High Mobility and Sharp Subthreshold Slope in Low-Voltage Operable Organic Field-Effect Transistors

Influence Of The Dielectric And Of The Active Layer Doping On The Fet Mobility In Ppv-Based Devices

Effect of Alkyl Side Chain Length on Electrical Performance of Ion-Gel-Gated OFETs Based on Difluorobenzothiadiazole-Based D-A Copolymers

Polysiloxane-Poly(Vinyl Alcohol) Composite Dielectrics For High-Efficiency Low Voltage Organic Thin Film Transistors

A Comparative Study of Plasma-Enhanced Chemical Vapor Gate Dielectrics for Solution-Processed Polymer Thin-Film Transistor Circuit Integration

Mixing Insulating Commodity Polymers with Semiconducting n‐type Polymers Enables high‐Performance Electrochemical Transistors

The Influence of Film Morphology in High‐Mobility Small‐Molecule:Polymer Blend Organic Transistors

Electron Donating Functional Polymer Dielectrics to Reduce the Threshold Voltage of n‐Type Organic Thin‐Film Transistors

Polymer Electret Improves the Performance of the Oxygen-Doped Organic Field-Effect Transistors

Tailoring the Dielectric Layer Structure for Enhanced Performance of Organic Field-Effect Transistors: the Use of a Sandwiched Polar Dielectric Layer

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

Interfacial Molecular Screening of Polyimide Dielectric Towards High-Performance Organic Field-Effect Transistors

High Performance Low-Voltage Organic Field-Effect Transistors Enabled by Solution Processed Alumina and Polymer Bilayer Dielectrics

Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors

Polymeric Semiconductor/graphene Hybrid Field-Effect Transistors

High-Performance, Low-Operating Voltage, And Solution-Processable Organic Field-Effect Transistor With Silk Fibroin As The Gate Dielectric

Optimization of Alkyl Side Chain Length in Polyimide for Gate Dielectrics to Achieve High Mobility and Outstanding Operational Stability in Organic Transistors