Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Recent advancements in achieving high dielectric constant polymer dielectrics for low-power-consumption organic field-effect transistors

High-k polymeric gate insulators for organic field-effect transistors

Binary Polymer Composite Dielectrics for Flexible Low-Voltage Organic Field-Effect Transistors

Polysiloxane-Poly(Vinyl Alcohol) Composite Dielectrics For High-Efficiency Low Voltage Organic Thin Film Transistors

Editorial: High-Performance Organic Thin-Film Transistors

Low-voltage organic field-effect transistors by using solution-processable high-κ inorganic-polymer hybrid dielectrics

Toward Efficient Charge Transport of Polymer-Based Organic Field-Effect Transistors: Molecular Design, Processing, and Functional Utilization

Recent Advances on π-Conjugated Polymers as Active Elements in High Performance Organic Field-Effect Transistors

Fröhlich polaron effect in flexible low-voltage organic thin-film transistors gated with high-k polymer dielectrics

Low-Voltage Printed, All-Polymer Integrated Circuits Employing a Low-leakage and High-Yield Polymer Dielectric

Recent Progress in Design of Conductive Polymers to Improve the Thermoelectric Performance

Polymer Electrolyte Blend Gate Dielectrics for High-Performance Ultrathin Organic Transistors: Toward Favorable Polymer Blend Miscibility and Reliability

Correlation between dielectric/organic interface properties and key electrical parameters in PPV-based OFETs.

Influence Of The Dielectric And Of The Active Layer Doping On The Fet Mobility In Ppv-Based Devices

Hysteresis-Free, High-Performance Polymer-Dielectric Organic Field-Effect Transistors Enabled by Supercritical Fluid.

Low-voltage operating, high mobility top-gate structural flexible organic thin-film transistor with a one-step spin-coated binary polymer gate dielectric

Low Temperature Cross-Linked, High Performance Polymer Gate Dielectrics for Solution-Processed Organic Field-Effect Transistors

Corona Poling Induced Phase Transition to Highly Polar Phase in P(VDF-TrFE-CFE) Dielectric and Charge Transport of Organic Field-Effect Transistors

Spontaneous Generation of a Molecular Thin Hydrophobic Skin Layer on a Sub-20 nm, High- k Polymer Dielectric for Extremely Stable Organic Thin-Film Transistor Operation

Polymer single crystal dielectrics for organic field-effect transistors

Polymer Electret Improves the Performance of the Oxygen-Doped Organic Field-Effect Transistors