Abstract:Incorporating a polymer dielectric blend with amine‐functionalized units facilitates low voltage operation of bispentafluorophenoxy silicon phthalocyanine in organic thin film transistors (OTFTs) while maintaining high charge mobility. Low‐cost and high‐performance electronics based on synthetically simple materials are required to fuel the deployment of smart packaging and wearable electronics. Metal phthalocyanines (MPcs) are promising semiconductors for use in n‐type organic thin film transistors (OTFTs) but often require high operating voltages. The first silicon phthalocyanine‐based OTFT with a polymer dielectric is reported as an alternative to traditional metal oxide dielectrics. Incorporating poly(methyl methacrylate) (PMMA) as the dielectric successfully reduces the threshold voltage (VT) of bispentafluorophenoxy SiPc (F10‐SiPc) from 14.9V to 7.3V while retaining high mobility. Further reduction in VT is obtained by using copolymers and blends of PMMA and dimethylamino ethyl methacrylate (DMAEMA)‐containing polymers, where a higher molar fraction of DMAEMA leads to a consistent drop in VT to ‐0.7 V. The electron‐donating groups of the tertiary amines in the DMAEMA show clear interfacial doping of the semiconductor, reducing the voltage required to populate the dielectric/semiconductor interface with charge carriers and turn on the device. Blending trace amounts of DMAEMA‐containing copolymers with PMMA proves to be an effective strategy for reducing the VT while keeping the charge mobility high, unlike when using pure copolymers with elevated DMAEMA content. Time of flight secondary ion mass spectroscopy (ToF‐SIMS) and X‐ray photoelectron spectroscopy (XPS) demonstrate that the DMAEMA‐containing copolymer is floating to the surface of the PMMA blend at the dielectric–semiconductor interface, which explains the reduced VT. Synchrotron scanning transmission X‐ray microscopy (STXM) demonstrates that PMMA promotes a more edge‐on orientation of F10‐SiPc films, compared to the more face‐on orientation when deposited on the DMAEMA containing copolymer. This study demonstrates a straightforward process for designing dielectric polymers and their blends for the reduction in VT for n‐type OTFTs.

Small Molecule: Polymer Blends for N‐type Organic Thin Film Transistors via Bar‐coating in Air

Enhancing the Performance of Solution-Processed Organic Thin-Film Transistors by Blending Binary Compatible Small Molecule Semiconductors

Organic-semiconductor: Polymer-electret Blends for High-Performance Transistors

Bar-Coated Organic Thin-Film Transistors with Reliable Electron Mobility Approaching 10 cm<SUP>2</SUP> V<SUP>-1</SUP> s<SUP>-1</SUP>

Vertical Phase Separation in Small Molecule:Polymer Blend Organic Thin Film Transistors Can Be Dynamically Controlled

Mixing Insulating Commodity Polymers with Semiconducting n‐type Polymers Enables high‐Performance Electrochemical Transistors

Blending Crystalline/liquid Crystalline Small Molecule Semiconductors: A Strategy Towards High Performance Organic Thin Film Transistors

Air-Stable Solution-Processed N-Channel Organic Thin Film Transistors with Polymer-Enhanced Morphology

Wettability Control of Interfaces for High-Performance Organic Thin-Film Transistors by Soluble Insulating Polymer Films.

Diketopyrrolopyrrole-based small molecules for solution-processed n-channel organic thin film transistors

Organic Thin Film Transistors Incorporating Solution Processable Thieno[3,2-b]thiophene Thienoacenes

Highly Crystalline, Highly Stable N-Type Ultrathin Crystalline Films Enabled by Solution Blending Strategy Toward Organic Single-Crystal Electronics

Enhanced Polymer Thin Film Transistor Performance by Carefully Controlling the Solution Self‐Assembly and Film Alignment with Slot Die Coating

Contact‐Induced Nucleation in High‐Performance Bottom‐Contact Organic Thin Film Transistors Manufactured by Large‐Area Compatible Solution Processing

Nanofluidic/nanoelectronic Study on Solvent-Processed Nanoscale Organic Transistors

Solution-processed High Performance Organic Thin Film Transistors Enabled by Roll-to-roll Slot Die Coating Technique

Solution‐Processed Small Molecule‐Polymer Blend Organic Thin‐Film Transistors with Hole Mobility Greater Than 5 Cm2/vs

Organic Semiconductor/Polymer Blend Films for Organic Field‐Effect Transistors

Controlling Aggregation and Crystallization of Solution Processed Diketopyrrolopyrrole Based Polymer for High Performance Thin Film Transistors by Introducing Solvent Additive

Significantly Increasing the Ductility of High Performance Polymer Semiconductors Through Polymer Blending

Electron Donating Functional Polymer Dielectrics to Reduce the Threshold Voltage of n‐Type Organic Thin‐Film Transistors