Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Organic Semiconductor/Polymer Blend Films for Organic Field‐Effect Transistors

Printable and Flexible Phototransistors Based on Blend of Organic Semiconductor and Biopolymer

Solution-sheared Thin Films of a Donor-Acceptor Random Copolymer/polystyrene Blend As Active Material in Field-Effect Transistors

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

Scalable Fabrication of Highly Crystalline Organic Semiconductor Thin Film by Channel‐Restricted Screen Printing toward the Low‐Cost Fabrication of High‐Performance Transistor Arrays

Editorial: High-Performance Organic Thin-Film Transistors

Solution Processed Large-Scale Small Molecular Organic Field-Effect Transistors

Organic Semiconductor/Insulator Blends for Elastic Field‐Effect Transistors and Sensors

Meniscus-guided coating of organic crystalline thin films for high-performance organic field-effect transistors

From Complexity to Simplicity: Overcoming Photolithography Challenges in Polymer Organic Semiconductor Transistors with Nano-Aluminum Micro-Pattern Infusion Technology

High Performing Solution-Coated Electrolyte-Gated Organic Field-Effect Transistors for Aqueous Media Operation

Printing organic‐field effect transistors from semiconducting polymers and branched polyethylene

Air Stable High Resolution Organic Transistors by Selective Laser Sintering of Ink-Jet Printed Metal Nanoparticles

Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals

Organic-semiconductor: Polymer-electret Blends for High-Performance Transistors

Organic Semiconductor Field-Effect Transistors Based on Organic-2D Heterostructures

Pursuing Polymer Dielectric Interfacial Effect in Organic Transistors for Photosensing Performance Optimization.

Scalable Processing of Low Voltage Organic Field Effect Transistors with a Facile Soft-Contact Coating Approach

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping

High-Performance Organic Field-Effect Transistors with Dielectric and Active Layers Printed Sequentially by Ultrasonic Spraying

Air Stable High Resolution OFET (organic Field Effect Transistor) Fabrication Using Inkjet Printing and Low Temperature Selective Laser Sintering Process