Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Rapid Prototyping for Accelerated Establishment of Film Processing‐Performance Relationships in Silicon Phthalocyanine OFETs

Organic Semiconductor/Polymer Blend Films for Organic Field‐Effect Transistors

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

Editorial: High-Performance Organic Thin-Film Transistors

High Performance Solution Processed n‐Type OTFTs through Surface Engineered F–F Interactions Using Asymmetric Silicon Phthalocyanines

From Complexity to Simplicity: Overcoming Photolithography Challenges in Polymer Organic Semiconductor Transistors with Nano-Aluminum Micro-Pattern Infusion Technology

Pursuing Polymer Dielectric Interfacial Effect in Organic Transistors for Photosensing Performance Optimization.

Silicon Phthalocyanines for n-Type Organic Thin-Film Transistors: Development of Structure–Property Relationships

Engineering the Template Layer for Silicon Phthalocyanine‐Based Organic Thin Film Transistors

Cleanroom‐Free Direct Laser Micropatterning of Polymers for Organic Electrochemical Transistors in Logic Circuits and Glucose Biosensors

Designing Contact Independent High‐Performance Low‐Cost Flexible Electronics

Tunable Solid‐State Properties and Anisotropic Charge Mobility in Hydrogen‐Bonded Diketopyrolopyrrole Polymers via Automated Device Fabrication and Characterization

Direct laser patterning of organic semiconductors for high performance OFET-based gas sensors

Patterning Liquid Crystalline Organic Semiconductors via Inkjet Printing for High‐Performance Transistor Arrays and Circuits

Preparation of Nanocomposite-Based High Performance Organic Field Effect Transistor via Solution Floating Method and Mechanical Property Evaluation

Direct-written polymer field-effect transistors operating at 20 MHz

Deposition-Pressure-Induced Optimization of Molecular Packing for High-Performance Organic Thin-Film Transistors Based on Copper Phthalocyanine

Interface Collaborative Strategy for High Mobility Organic Single‐Crystal Field‐Effect Transistors with Ideal Current–Voltage Curves

Toward Efficient Charge Transport of Polymer-Based Organic Field-Effect Transistors: Molecular Design, Processing, and Functional Utilization

Surface Etching of Polymeric Semiconductor Films Improves Environmental Stability of Transistors

High-resolution patterning of organic semiconductor single crystal arrays for high-integration organic field-effect transistors