Abstract:3D printing polymers via fused filament fabrication (FFF) exhibits significant advantages such as low cost and high efficiency, thus FFF has become one of the most popular production methods in the 3D printing field. For a printing using a soft filament feedstock, it is important to understand how to optimize its fabrication process when attempting to improve the packing morphology of deposited melt strand and thus enhance the mechanical performance. This work intends to be a step forward obtaining a strategy for high-quality FFF printing without compromising printing efficiency for those filaments with low stiffness as well as low feeding stress. Using a commercial desktop printer, a facile method to reduce the porosity of FFF-printed thermoplastic polyurethane (TPU) parts was proposed by controlling printing parameters using specific TPU filaments with varying hardness. Tensile strength and tear resistance of the printed parts were measured to assess the optimization printing (OP) strategy. Owing to the significant reduction of porosity, less thermal degradation and higher molecular orientation in FFF, the tensile strength and tear resistance of the OP-printed parts were approximately 95% and 126.8% of those of parts fabricated via injection molding, respectively. Compared with the standard printing (SP) method, OP strategy was found to be effective in improving mechanical performance. The mechanism was then analyzed in terms of nozzle moving trajectory and filament loading ratio, with particular emphasis on feedstock in the continuity and stability of melt strand deposition. In addition, the correlation between residual porosity and mechanical performance of FFF-printed parts was established, providing direction for overcoming the practical limitations of FFF printing, thus paving a way to print high-quality elastomeric materials.

Fabrication of Flexible Wood Flour/thermoplastic Polyurethane Elastomer Composites Using Fused Deposition Molding

Fabrication and reinforcement of ternary composites based on polypropylene matrix with bamboo particle/ultrafine bamboo-char

FDM 3D Printing and Properties of WF/PBAT/PLA Composites

Preparation and properties of heat-treated esterified wood flour/polylactic acid composites for FDM 3D printing

Mechanical dependence of 3D-printed thermoplastic polyurethane reinforced with minor continuous carbon fibres

Comprehensive characterization of 3D-printed TPU/carbon black composites: Morphological, thermal, and mechanical properties

A Comparative Analysis of Chemical, Plasma and In Situ Modification of Graphene Nanoplateletes for Improved Performance of Fused Filament Fabricated Thermoplastic Polyurethane Composites Parts

Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing

Tensile properties of 3D printed structures of polylactide with thermoplastic polyurethane

Effect of Stabilizers and Thermoplastic Polyurethane on the Properties of Three-Dimensional Printed Photochromic Wood Flour/Polylactic Acid Composites

Desktop printing of 3D thermoplastic polyurethane parts with enhanced mechanical performance using filaments with varying stiffness

3D printing thermo-responsive shape memory polymer composite based on PCL/TPU blends

Wood‐thermoplastic Composites from Wood Flour and High‐density Polyethylene

3D-Printing of Biomass Furan-Based Polyesters with Robust Mechanical Performance and Shape Memory Property

Effect of multidimensional filler hybridization on the mechanical properties of thermoplastic polyurethane composites prepared by selective laser sintering

Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing

Study on performance characteristics of fused deposition modeling 3D ‐printed composites by blending and lamination

A Novel Method of Fabricating Designable Polylactic Acid (pla)/thermoplastic Polyurethane (TPU) Composite Filaments and Structures by Material Extrusion Additive Manufacturing

Material property characterization of 3D printed polypropylene wood plastic composites

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties