Abstract:Biowaste to 3D printed biocomposites. The enhancement of the mechanical and thermal characteristics of 3D printed polylactic acid (PLA) composites reinforced by coir fiber powder (CFP) has been investigated by varying the weight percentage (wt%) of the reinforcement and annealing process. CFP/PLA composite filaments with CFP compositions of 0.1, 0.3, and 0.5 wt% were fabricated. These filaments were used to print CFP/PLA test specimens. The specimens were annealed at 90°C for 120 min in a hot air oven followed by cooling at room temperature. Mechanical, morphological, crystalline, and thermal characterizations were conducted on these specimens. The tensile and flexural strength of neat PLA were observed as 49.7 and 82.4 MPa which decreased by 6.4% and 8.13% respectively for printed composite specimens with 0.5 wt% CFP as reinforcement material. On the other hand, the annealed CFP/PLA composite specimen, with 0.1 wt% CFP as a reinforcement material, demonstrated higher tensile and flexural strength. Specifically, it exhibited a maximum tensile strength of 56.4 MPa and a maximum flexural strength of 92.9 MPa, which are 13.5% and 12.7% higher, respectively, than neat PLA. These strengths are 15.5% and 16.7% higher, respectively, than those of the unannealed CFP/PLA composite specimen with the same wt% of CFP reinforcement. The annealing process increased the crystallinity of composites by enhancing the crystallinity index (63%) and crystalline size (6.7 nm). The high thermal stability of composites (with a glass transition temperature of 256°C) makes them suitable for applications in food and medical packaging. Highlights Enhancement of thermo‐mechanical characteristics of 3D printed bio‐composites. Annealing process improved mechanical features of 3D printed bio‐composites. Annealed composite with 0.1 wt% as reinforcement demonstrated better properties. SEM and XRD studies confirmed failure mechanisms and crystalline structure. Thermal and mechanical assets favor its utilization in food wrapping applications.

Preparation and properties of heat-treated esterified wood flour/polylactic acid composites for FDM 3D printing

Properties of Heat-Treated Wood Fiber–Polylactic Acid Composite Filaments and 3D-Printed Parts Using Fused Filament Fabrication

FDM 3D Printing and Properties of WF/PBAT/PLA Composites

Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing

Comparative Investigations on Properties of Three Kinds of FDM 3D-Printed Natural Plant Powder/Poly(lactic acid) Biocomposites

Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing

Feasibility study on thermo‐mechanical performance of 3D printed and annealed coir fiber powder/polylactic acid eco‐friendly biocomposites

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

Blending and functionalisation modification of 3D printed polylactic acid for fused deposition modeling

Effect of thermal modification of wood particles for wood-PLA composites on properties of filaments, 3D-printed parts and injection moulded parts

Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

Innovative Approaches for Manufacturing Epoxy‐Modified Wood and Cellulose Fiber Composites: A Comparison between Injection Molding and 3D Printing

Fundamental study and modification of Kenaf fiber reinforced polylactic acid bio-composite for 3D printing filaments

The Use of Agricultural Waste in the Modification of Poly(lactic acid)-Based Composites Intended for 3D Printing Applications. The Use of Toughened Blend Systems to Improve Mechanical Properties

Sustainable improvement in the polylactic acid properties of 3D printing filaments: The role of bamboo fiber and epoxidized soybean oil‐branched cardanol ether compatibilizer

Effect of Extrusion Temperature on the Physico-Mechanical Properties of Unidirectional Wood Fiber-Reinforced Polylactic Acid Composite (WFRPC) Components Using Fused Deposition Modeling

Preparation and Characterization for the Thermal Stability and Mechanical Property of PLA and PLA/CF Samples Built by FFF Approach

Preparation of polycarbonate/poly(lactic acid) with improved printability and processability for fused deposition modeling

Mechanical, thermal and rheological properties of polylactic acid (PLA)/epichlorohydrin modified pine wood flour (EWF) composites