Abstract:Filament-based material extrusion additive manufacturing (MEAM) is one of the most commonly used techniques in additive manufacturing (AM). In spite of recent notable development in the MEAM process, there is still a need to develop more materials that can be printed consistently using this technique. Isotactic polypropylene (PP), a popular thermoplastic material, undergoes rapid crystallization and subsequent volume contraction. This can lead to residual stress buildup in PP parts when processed using MEAM, resulting in poor adhesion to the printing platform, poor geometric tolerance, and mechanical performance. In this work, the effects of varying composition of low molecular weight hydrocarbon resins incorporated to PP are investigated. Specifically, the thermal behavior, crystallization, morphology, and printability of the blends are studied. The rapid crystallization of PP has been delayed by the addition of hydrocarbon resins that provided a larger time window for the residual stresses to relax. The addition of the resins to the pure PP matrix lowers the crystallization temperature of PP from 121.8 to 116.0 °C, which further enables additional diffusion during the solidification process. Polarized optical microscopy demonstrates the differences in crystalline morphology, which is expected to impact the structure at the interlayer boundaries between deposited layers. The combination of modifications in crystallization rate, time, and morphology significantly affects the interlayer adhesion and residual stress state, which directly controls the mechanical properties and part warpage of printed parts. Tensile bars of the different blends were printed in two different orientations to analyze the mechanical performance and study part anisotropy. The maximum tensile stress of pure PP (26.8 ± 2.1 MPa) printed at a ±45° raster angle increased with addition of 20 wt % hydrocarbon resin (32.4 ± 3.0 MPa) when printed under the same conditions. The improvement in the tensile strength is due to a combination of changes in crystallinity, morphology, and improved interlayer adhesion during printing. The parts were annealed postprinting to improve polymer chain diffusion across the layers, thereby improving interlayer adhesion and resulting in tensile modulus and strength values in excess of 90% of injection-molded PP parts.

A Novel Method of Fabricating Designable Polylactic Acid (pla)/thermoplastic Polyurethane (TPU) Composite Filaments and Structures by Material Extrusion Additive Manufacturing

Development of Mechanically Enhanced Polycaprolactone Composites by a Functionalized Titanate Nanofiller for Melt Electrowriting in 3D Printing.

Constructing synergistically strengthening-toughening 3D network bundle structures by stereocomplex crystals for manufacturing high-performance thermoplastic polyurethane nanofibers reinforced poly(lactic acid) composites

Blending and functionalisation modification of 3D printed polylactic acid for fused deposition modeling

Experimental investigation of 3D printed polylactic acid and polylactic acid – hydroxyapatite composite through material extrusion technique for biomedical application

Development of Fiber-Reinforced Polymer Composites for Additive Manufacturing and Multi-Material Structures in Sustainable Applications

Additive Manufacturing of Thermoplastic Elastomer Structures using Dual Material Core-Shell Filaments

Advancing additive manufacturing: 3D‐printing of hybrid natural fiber sandwich (Nona/Soy‐PLA) composites through filament extrusion and its effect on thermomechanical properties

Modeling Materials Coextrusion in Polymers Additive Manufacturing

Investigations of polylactic acid reinforced composite feedstock filaments for multimaterial three-dimensional printing applications

Architecture of covalent bonds between filament layers to enhance performance of 3D printing biodegradable polymer blends

A novel printing strategy to fabricate polyetheretherketone (PEEK)-based composites via hollow filaments filled with multiple reinforcements

Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing

Material Extrusion-Based Additive Manufacturing with Blends of Polypropylene and Hydrocarbon Resins

Tunable soft–stiff hybridized fiber-reinforced thermoplastic composites using controllable multimaterial additive manufacturing technology

Optimizing bonding conditions between multilayer FFF material extrusion

Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites

Combining Injection Molding and 3D Printing for Tailoring Polymer Material Properties

The fabrication of long carbon fiber reinforced polylactic acid composites via fused deposition modelling: Experimental analysis and machine learning

Super-toughened Poly(lactic Acid)/thermoplastic Poly(ether)urethane Nanofiber Composites with In-Situ Formation of Aligned Nanofibers Prepared by an Innovative Eccentric Rotor Extruder

Characterisation and manufacturing methods of material extrusion 3D printing composite filaments based on polylactide and nanohydroxyapatite