Abstract:A promising approach to accelerate cement hydration known as seeding technology has been discovered using nano-particles to provide additional nucleation sites for growing of C-S-H. Two different types of polymer, polycarboxylate (PCE) and polysulfonate (PSE) were used as stabilizer to synthesize nano-C-S-H via co-precipitation process. The obtained C-S-H-polymer composites were characterized by means of XRD, FTIR, thermogravimetric analysis (TGA), TEM, dynamic laser scattering (DLS), and BET. DLS measurement shows that the particle size of the obtained C-S-H-polymer suspension ranges from 82.6 to 589.9nm. The results of DLS and BET show that the particle size of the C-S-H particles synthesized using PCE polymer as stabilizer is smaller than those synthesized with PSE polymer, and hence the specific surface area is much higher. FTIR and TGA results confirm the presence of the polymers in the obtained C-S-H composites particles. XRD results indicate that the presence of the polymers reduces the crystallinity of C-S-H due to the absence of the d002 peak at 2 theta of 7 degrees. The calorimetry results show that the main hydration peak of cement is dramatically increased by the addition of the C-S-H-polymer composites. It is interestingly found that the acceleration effect of the C-S-H-polymer composites is linearly proportional to the total surface area of the nanoparticles introduced into the cement pastes. At the same time, it is found that the secondary hydration peak, usually known as the sulfate-depletion peak, is greatly advanced by addition of the C-S-H nano-particles in comparison with the blank cement paste. The acceleration effect of the nano-C-S-H is further verified in a pure C3S system.

Hydration kinetics of cement incorporating different nanoparticles at elevated temperatures

Early-Age Hydration Heat Evolution and Kinetics of Portland Cement Containing Nano-Silica at Different Temperatures

Effect of Nano-Sio2 with Different Particle Size on the Hydration Kinetics of Cement

Comparative Study on the Effects of Nano-Sio2, Nano-Fe2o3 and Nano-Nio on Hydration and Microscopic Properties of White Cement

Micro Expressions of Cement Hydration Kinetics

Effects of Nano-CSH on the hydration process and mechanical property of cementitious materials

The Effect of Nanoparticles on the Properties of Calcium Aluminate Cement Pastes at High Temperatures

Comparative study on mechanisms for improving mechanical properties and microstructure of cement paste modified by different types of nanomaterials

Model for Hydration Heat of Cement in Concrete and Its Application

Influence of Various Nanomaterials on the Rheology and Hydration Kinetics of Oil Well Cement

Preparation of Nano-Sized C-S-H and Its Acceleration Mechanism on Portland Cement Hydration at Different Temperatures

Effect of C-S-H Nucleating Agent on Cement Hydration

Effect of n-C-S-H on Hydration and Reinforcement of Mineral Powder-Cement System at Low Temperatures

Kinetic study on the hydration of supersulfated cements

The effects of nano-C-S-H with different polymer stabilizers on early cement hydration

Effects of nano-C-S-H seed crystal on early-age hydration process of Portland cement

KINETICS MODEL FOR THE HYDRATION MECHANISM OF CEMENTITIOUS MATERIALS

Effect of High Temperature on Compressive Strength and Microstructure of Cement Paste Modified by Micro- and Nano-calcium Carbonate Particles

Influence of Nanoparticles on Fluidity and Mechanical Properties of Cement Mortar

Hydration Kinetics of the Epoxy Resin-Modified Cement at Different Temperatures

Hydration of Ultrafine and Ordinary Portland Cement at Early Ages