Abstract:When subjected to high temperatures, cement-based materials can dehydrate, which, in turn, affects the mechanical property of the main binding phase (calcium silicate hydrate) at the atomic scale. However, the effects of high temperature on the tensile and compressive behavior of calcium silicate hydrate (C−S−H) grains under uniaxial loading remains poorly understood. In this work, based on reactive molecular simulations, the tensile strength, compressive strength, and stress-strain relations of C−S−H grains with four calcium/silicon (C/S) ratios (1.10, 1.33, 164, and 1.80) both under and after (residual properties) high temperatures are investigated. It is shown that C−S−H grains can shrink due to the water loss induced by high temperature, and a low C/S ratio can lead to a thermo-stable molecular structure. Meanwhile, the residual tensile strength can be enhanced, particularly the tensile strength in the z-direction. Upon the residual compressive strength, in the x and y directions, high temperature can decrease the residual compressive strength for C/S = 1.10 or 1.33 but has no apparent effect for C/S = 1.64 or 1.80. While in the z-direction, the residual compressive strength can be enhanced due to the reduction in the interlayer space. In addition, high temperature can improve the residual tensile ductility but has no obvious effect on the residual compressive stress-strain relations. As for the mechanical properties under high temperature, both the tensile and compressive strengths can be weakened except that the tensile strength in the z-direction can undergo an increasing trend when the temperature is below 800 K due to significant shrinkage in the z-direction. Moreover, high temperature can make stress-strain curves exhibit good plasticity. Discussion indicates that the strength degradation of C−S−H gels or cement paste exposure to high temperatures is likely caused by the increasing porosity and coarsening of the void or defect size.

Effect of High Temperature on Compressive Strength and Microstructure of Cement Paste Modified by Micro- and Nano-calcium Carbonate Particles

Long-term Thermal Performance of Oil Well Cement Modified by Silica Flour with Different Particle Sizes in HTHP Environment

Effect and mechanism of nano-Ca 10 (PO 4 ) 6 (OH) 2 additive on compressive strength of calcium aluminate cement at high temperature

Study on microstructure deterioration of cement paste exposed to elevated temperature

The Effect of Nanoparticles on the Properties of Calcium Aluminate Cement Pastes at High Temperatures

Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes

Effect of Calcium Carbonate Whisker and Fly Ash on Mechanical Properties of Cement Mortar under High Temperatures

Effects of high temperature on the mechanical behavior of calcium silicate hydrate under uniaxial tension and compression

Influence of elevated temperature on the microstructures and mechanical properties of cement-based mortar with sands and refractory materials

Microstructural Analysis of the Effect of Using Nano-silica on the Mechanical Properties of Cement–Sand Mortar Under the Effect of Heat

Effect of micro‐structural changes on concrete properties at elevated temperature: Current knowledge and outlook

Influence of Binder Types and Temperatures on the Mechanical Properties and Microstructure of Cemented Paste Backfill

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Performance of carbon nanomaterials incorporated with concrete exposed to high temperature

Microstructure and Mechanical Properties of High-Toughness Fiber-Reinforced Cementitious Composites after Exposure to Elevated Temperatures

A review of high temperature properties of cement based composites: Effects of nano materials

EFFECT OF HIGH TEMPERATURE ON NANO-MODIFIED CEMENTITIOUS COMPOSITES

Effects of Tuff Powder on the Hydration Properties of Cement-Based Materials under High Temperature

Temperature Effect of Hydration and Microstructure of Tricalcium Silicate–Slag Powder Hydrated Composites: An Experimental and Molecular Dynamics Investigation

Effect of Temperature on Pore Structure and Strength of Concrete

The effects of high temperature heating on the gas permeability and porosity of a cementitious material