Abstract:The compressive response of a NiTi shape-memory alloy is investigated at high strain rates, using UCSD’s modified split Hopkinson pressure bar and a mini-Hopkinson bar with specially designed striker bars. To obtain a constant strain rate during the formation of the stress-induced martensite phase in a Hopkinson test, a copper-tube pulse shaper of suitable dimensions or a stepped striker bar is employed, since without a pulse shaper or with a uniform striker bar, the strain rate of the sample will vary significantly as the material’s microstructure changes from austenite to martensite, whereas with proper pulse shaping techniques a nearly constant strain rate can be achieved over a certain deformation range. At a very high strain rate, the yield stress and the stress-induced martensite formation process are significantly different from those at moderately high strain rates, suggesting that, correspondingly, different microstructural changes may be involved in the phase transition regime. The material’s yield stress appears lower when measured in a mini-Hopkinson bar (with very small samples) as compared with that measured by a 1/2-in. Hopkinson bar (with relatively large samples), possibly due to the sample size that may produce different deformation mechanisms within the superelastic strain range. The transition stress from the austenite to the martensite phase shows strain-rate sensitivity. This may be explained by considering the interfacial motion of the formed martensite phase, based on the thermally activated and dislocation-drag models. There exists a certain critical strain-rate level, at which the transition stress for the stress-induced martensite formation equals the yield stress of the austenite phase. Therefore, the shape-memory alloy deforms by the formation of stress-induced martensites, accompanied by the yielding of the martensite phase at this critical strain rate, while the material deforms plastically by the dislocation-induced plastic slip at strain rates above this critical level.

Effect of the Amplitude of the Training Stress on the Fatigue Lifetime of NiTi Shape Memory Alloys

Experimental Study of One‐dimensional Superelastic Capability of a Nearly Equi‐atomic NiTi Shape Memory Alloy

Enhanced Fatigue Resistance of Nanocrystalline Ni50.8Ti49.2 Wires by Mechanical Training

Regulation of Microstructure, Phase Transformation Behavior, and Enhanced High Superelastic Cycling Stability in Laser Direct Energy Deposition NiTi Shape Memory Alloys Via Aging Treatment

Combined Effects of Grain Size and Training on Fatigue Resistance of Nanocrystalline NiTi Shape Memory Alloy Wires

Experimental and theoretical investigation of the frequency effect on low cycle fatigue of shape memory alloys

Applying the Infrared Self-heating Method to a Comprehensive Fatigue Analysis of NiTi Shape Memory Alloys

Superelastic and Cyclic Response of Nitisma at Various Strain Rates and Temperatures

Thermomechanical fatigue of post-weld heat treated NiTi shape memory alloy wires

Whole-life transformation ratchetting and fatigue of super-elastic NiTi Alloy under uniaxial stress-controlled cyclic loading

Effect of the Thermomechanical Coupling on Fatigue Crack Propagation in NiTi Shape Memory Alloys

Very High Strain-Rate Response of a NiTi Shape-Memory Alloy

Energy-Based Fatigue Model for Shape Memory Alloys Including Thermomechanical Coupling

Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling

Effects of triaxial stress on martensite transformation, stress–strain and failure behavior in front of crack tips in shape memory alloy NiTi

Role of Microstructure on the Actuation Fatigue Performance of Ni-Rich NiTiHf High Temperature Shape Memory Alloys

Effect Of Aging And Training On The Two-Way Shape Memory Effect Of A Nial-Fe Alloy

Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy

Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys

Effect of thermomechanical training temperature on the two-way shape memory effect of TiNi and TiNiCu shape memory alloys springs

Stress-induced Martensite Reorientation and Its Related Performances in Trained Β-Ti Based Shape Memory Alloy