Abstract:The compressive response of a NiTi shape-memory alloy is investigated at high strain rates, using UCSD’s modified split Hopkinson pressure bar and a mini-Hopkinson bar with specially designed striker bars. To obtain a constant strain rate during the formation of the stress-induced martensite phase in a Hopkinson test, a copper-tube pulse shaper of suitable dimensions or a stepped striker bar is employed, since without a pulse shaper or with a uniform striker bar, the strain rate of the sample will vary significantly as the material’s microstructure changes from austenite to martensite, whereas with proper pulse shaping techniques a nearly constant strain rate can be achieved over a certain deformation range. At a very high strain rate, the yield stress and the stress-induced martensite formation process are significantly different from those at moderately high strain rates, suggesting that, correspondingly, different microstructural changes may be involved in the phase transition regime. The material’s yield stress appears lower when measured in a mini-Hopkinson bar (with very small samples) as compared with that measured by a 1/2-in. Hopkinson bar (with relatively large samples), possibly due to the sample size that may produce different deformation mechanisms within the superelastic strain range. The transition stress from the austenite to the martensite phase shows strain-rate sensitivity. This may be explained by considering the interfacial motion of the formed martensite phase, based on the thermally activated and dislocation-drag models. There exists a certain critical strain-rate level, at which the transition stress for the stress-induced martensite formation equals the yield stress of the austenite phase. Therefore, the shape-memory alloy deforms by the formation of stress-induced martensites, accompanied by the yielding of the martensite phase at this critical strain rate, while the material deforms plastically by the dislocation-induced plastic slip at strain rates above this critical level.

Experimental Study of One‐dimensional Superelastic Capability of a Nearly Equi‐atomic NiTi Shape Memory Alloy

Superelastic and Cyclic Response of Nitisma at Various Strain Rates and Temperatures

An Experimental Study of the Superelastic Behavior in NiTi Shape Memory Alloys under Biaxial Proportional and Non-Proportional Cyclic Loadings

Very High Strain-Rate Response of a NiTi Shape-Memory Alloy

Regulation of Microstructure, Phase Transformation Behavior, and Enhanced High Superelastic Cycling Stability in Laser Direct Energy Deposition NiTi Shape Memory Alloys Via Aging Treatment

Phase Transformation Behavior of Pseudoelastic Niti Shape Memory Alloys under Large Strain

On Phase Transition Velocities of NiTi Shape Memory Alloys

Effect of Cyclic Loading on Apparent Young's Modulus and Critical Stress in Nano-Subgrained Superelastic NiTi Shape Memory Alloys

Effect of plasticity on superelasticity and hysteretic dissipation of NiTi shape memory alloy

Experimental study of super-elasticity of packer-oriented TiNi shape memory alloy

Whole-life transformation ratchetting and fatigue of super-elastic NiTi Alloy under uniaxial stress-controlled cyclic loading

Anomalous Stress-Strain Behavior of NiTi Shape Memory Alloy Close to the Border of Superelastic Window

Experimental Investigation on the Mechanical Instability of Superelastic NiTi Shape Memory Alloy

Temperature and Strain-Rate Dependence of the Superelastic Response in EBF3-fabricated and Post-Heat-treated NiTi Shape Memory Alloy

High Strain Rate Deformation of Martensitic Niti Shape Memory Alloy

Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling

High-Cycle Fatigue Mechanisms of a NiTi Shape Memory Alloy under Different Mean Strains

Phase Transformation Evolution in NiTi Shape Memory Alloy under Cyclic Nanoindentation Loadings at Dissimilar Rates

Numerical Study on Mechanical Response of Superelastic NiTi Shape Memory Alloy under Various Loading Conditions

Experimental Investigations Of Mechanical Behavior Of Superelastic Niti Shape Memory Alloy. (Sma) Wires

Low-fatigue Large Elastocaloric Effect in NiTi Shape Memory Alloy Enabled by Two-Step Transition