Abstract:Low-cycle fatigue (LCF) behavior of nickel-based precipitation-strengthened superalloy GH4145/SQ was investigated systematically under fully reversed total strain amplitude control conditions at 538°C in laboratory air. It was shown that the alloy exhibited a pronounced initial fatigue hardening followed by continuous fatigue softening to failure at high strain amplitudes, while at low strain amplitudes the initial hardening was followed by a well-defined saturation stage. Microstructure observations using optical and transmission-electron microscopy revealed that slip band density increased with increasing total strain amplitudes and the size of the γ′precipitates tended to reduction due to repeated shearing by the dislocations with continuous cyclic straining. The above changes in microstructures during cycling were essentially responsible for the fatigue hardening–softening behavior of the alloy. Both optical and SEM micrographs indicated that at low strain amplitudes crack propagation was basically transgranular, while at high strain amplitudes crack propagation was essentially intergranular. Bilinear behavior with a change of slope at a plastic strain amplitude of about 0.2pct was observed in cyclic stress–strain (CSS), Coffin–Manson (C–M) and plastic strain energy–life plots. A change in the number of operating slip systems and the fracture modes with the strain amplitude employed was used to explain this two-slope characteristic. In both the companion specimens test (CST) and the incremental step test (IST) methods the alloy exhibited non-masing type behavior. It was suggested that, for the first approximation, the half-life plastic strain energy could be calculated directly according to the equation without reckoning in the non-masing behavior.

Whole-life transformation ratchetting and fatigue of super-elastic NiTi Alloy under uniaxial stress-controlled cyclic loading

Experimental Study of One‐dimensional Superelastic Capability of a Nearly Equi‐atomic NiTi Shape Memory Alloy

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Superelastic and Cyclic Response of Nitisma at Various Strain Rates and Temperatures

Regulation of Microstructure, Phase Transformation Behavior, and Enhanced High Superelastic Cycling Stability in Laser Direct Energy Deposition NiTi Shape Memory Alloys Via Aging Treatment

Stress Redistribution and Stress Triaxiality Effect on the Fatigue Life of Notched Ni-based Single Crystal Superalloy at 760℃

Degradation of the recoverable strain during stress controlled full transformation cycling in NiTi shape memory alloys

Low-fatigue Large Elastocaloric Effect in NiTi Shape Memory Alloy Enabled by Two-Step Transition

High-Cycle Fatigue Mechanisms of a NiTi Shape Memory Alloy under Different Mean Strains

Constitutive model for uniaxial transformation ratchetting of super-elastic NiTi shape memory alloy at room temperature

Thermo-mechanically coupled functional fatigue of NiTi shape memory alloys under multiaxial cyclic loadings

Phase Transformation Behavior of Pseudoelastic Niti Shape Memory Alloys under Large Strain

Effect of Cyclic Loading on Apparent Young's Modulus and Critical Stress in Nano-Subgrained Superelastic NiTi Shape Memory Alloys

Effect of the Amplitude of the Training Stress on the Fatigue Lifetime of NiTi Shape Memory Alloys

Torsional whole-life transformation ratchetting under pure-torsional and non-proportional multiaxial cyclic loadings of NiTi SMA at human-body temperature: Experimental observations and life-prediction model

Abnormal superelastic cyclic behavior and stress-induced martensitic transformation mechanism of NiTi alloy with R phase

Review on structural fatigue of NiTi shape memory alloys: Pure mechanical and thermo-mechanical ones

Cyclic Phase Transformation Behavior of Nanocrystalline NiTi at Microscale

Phase Transformation Evolution in NiTi Shape Memory Alloy under Cyclic Nanoindentation Loadings at Dissimilar Rates

Deformation Microstructure Dependence of Low Cycle Tensile Fatigue Life of NiTi Wires

Effects of triaxial stress on martensite transformation, stress–strain and failure behavior in front of crack tips in shape memory alloy NiTi