Effect of Cyclic Loading on Apparent Young's Modulus and Critical Stress in Nano-Subgrained Superelastic NiTi Shape Memory Alloys

Shengcheng Mao,Xiaodong Han,Ming. H. Wu,Ze Zhang,Fei Hao,Danmin Liu,YueFei Zhang,Bihui Hou

DOI: https://doi.org/10.2320/matertrans.47.735

2006-01-01

MATERIALS TRANSACTIONS

Abstract:A series of uni-axial tensile cycling tests were conducted at room temperature in superelastic NiTi strip specimens with nano-grain size. The NiTi superelastic strip specimen's Apparent Young's Modulus (AYM) and the critical stress decrease when the specimen is subjected to an external uni-axial stress and the strain being higher than 1.5%. Both of the AYM and the critical stress become steady after 10-time cycling. The number of the (111)[1 (4) over bar3] oriented grains increases with extending the strain value. The sub-grain size grows with increasing mechanical cycling number due to the annihilation of the small angle boundaries. The AYM-softening is related to the grain re-orientation (texture evolution) and the formation of irreversible-stabilized B19' martensitic variants. The softness of the critical stress is principally attributed to the aspect that the grains re-orient to align along the two textural components (111)[1 (1) over bar0] and (111)[1 (4) over bar3] when the external stress being applied. The rotation of grains towards the observed orientation gives higher Schmid factor for the transformation and is one of the reasons for the decrease in AYM and critical stress. The orientation relationships between B2 parent phase and the strain-induced B19' martensite are observed to be: [111](B2) // [10 (1) over bar](M), (1 (1) over bar0)(B2) // (010)(M) and [111](B2) // [(1) over bar 10](M) and (1 (1) over bar0)(B2) // (001)(M).