Abstract:In this study, a Ni 50.4 Ti 49.6 shape memory alloy (SMA) was fabricated by selective laser melting (SLM), and it is found that heat treatments were effective to change the phase transformation behavior, microstructure, and superelasticity under compression for SLM Ni 50.4 Ti 49.6 . Detailed results based on EBSD demonstrated that, for SLM Ni 50.4 Ti 49.6 during solid solution and aging (450 °C) treatment, the ultrafine cellular and columnar grains (∼16.5 μm) in as-fabricated Ni 50.4 Ti 49.6 became equiaxed grains (∼70.2 μm), and the frequency of low-angle grain boundaries (26.7%→13.5%) and kernel average misorientation (0.37 → 0.21) decreased. The SEM and TEM analyses show that Ti-rich Ti 2 Ni/Ti 4 Ni 2 O x and Ni-rich Ni 4 Ti 3 precipitate phases were formed in the matrix simultaneously. After solid solution treatment, the size and distribution of Ti 2 Ni/Ti 4 Ni 2 O x almost unchanged with aging temperature increasing from 350 °C to 550 °C, however, the size of Ni 4 Ti 3 in aging-treated NiTi samples increased with aging temperature obviously, and it is interesting to find that the distribution of Ni 4 Ti 3 became uneven and dislocation networks were formed in the matrix when the aging treatment reached up to 550 °C, which originated from the internal stress generated by supersaturated Ni atoms. Furthermore, the results of superelasticity for aging-treated NiTi demonstrated that the characteristics of Ni 4 Ti 3 precipitate phase were powerful to influence the process of superelasticity decay/fatigue instead of determining the ultimately recovery strain after 10 compressive cycles. The aging-treated NiTi with evenly-distributed, high-density, and relatively-small Ni 4 Ti 3 precipitate phase shows minimum recovery strain at 1st cycle compression and best superelasticity stability among three aging-treated NiTi, which was attributed to strong obstruction effect of these Ni 4 Ti 3 precipitate for the occurrence of stress-induced martensitic transformation process and formation of dislocations. In contrast, the aging-treated NiTi with unevenly-distributed and low-density Ni 4 Ti 3 precipitate shows maximum recovery strain at 1st cycle compression and worst superelasticity stability. These results in this work can bring some meaningful insights into tailoring the microstructure and superelasticity of SLM NiTi SMAs.

Regulation of Microstructure, Phase Transformation Behavior, and Enhanced High Superelastic Cycling Stability in Laser Direct Energy Deposition NiTi Shape Memory Alloys Via Aging Treatment

Microstructure and Mechanical Properties of NiTi Shape Memory Alloys by Laser Engineered Net Shaping

Mechanism of High Temperature Mechanical Properties Enhancement of Ni-based Superalloys Repaired by Laser Directed Energy Deposition: Microstructure Analysis and Crystal Plasticity Simulation

A large compressive recoverable strain induced by heterogeneous microstructure in a Ni50.6Ti49.4 shape memory alloy via laser powder bed fusion and subsequent aging treatment

Effect of heat treatment on the microstructure and superelasticity of NiTi alloy via selective laser melting

Improved Superelastic Stability of NiTi Shape Memory Alloys Through Surface Nano-Crystallization Followed by Low Temperature Aging Treatment

Phase Transformation Behavior and Mechanical Properties of NiTi Shape Memory Alloys Fabricated by Directed Laser Deposition

Influence of Processing Parameter on Phase Transformation and Superelastic Recovery Strain of Laser Solid Forming NiTi Alloy

Effect of solution treatment and aging on microstructural evolution and mechanical behavior of NiTi shape memory alloy

Microstructures, Martensitic Transformation and Shape Memory Behaviors of Aged Ti50.5Ni33.5Cu11.5Pd4.5 Alloys

Accelerated improvement in tensile superelasticity of electron beam directed energy deposition manufactured NiTi alloys by artificial thermal cycling combined with low temperature aging treatment

Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys

Effect of Solution Treatment on the Microstructure, Phase Transformation Behavior and Functional Properties of NiTiNb Ternary Shape Memory Alloys Fabricated Via Laser Powder Bed Fusion In-Situ Alloying

Improved Superelastic Stability by Nanosegregation Via Low-Temperature Aging in Ti-50.9 At.% Ni Shape Memory Alloy

High-Superelasticity NiTi Shape Memory Alloy by Directed Energy Deposition-Arc and Solution Heat Treatment

Mechanical Behavior and Shape Memory Effects of NixTi1‐x alloys with Tunable Mixing of Ni/Ti Powders by Laser Directed Energy Deposition

Improvement of Tensile Superelasticity by Aging Treatment of NiTi Shape Memory Alloys Fabricated by Electron Beam Wire-Feed Additive Manufacturing

Effects of Ageing on Microstructure, Martensitic Transformation and Shape Memory Performance of a Ni-rich Ti49.5Ni34.5Cu11.5Pd4.5 Alloy

Large Superelastic Recovery And Elastocaloric Effect In As-Deposited Additive Manufactured Ni50.8ti49.2 Alloy

Effect of solution treatment on the microstructure, phase transformation behaviour and functional properties of NiTiNb ternary shape memory alloys fabricated via laser powder bed fusion in-situ alloying

Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy