Abstract:In this study, a Ni 50.4 Ti 49.6 shape memory alloy (SMA) was fabricated by selective laser melting (SLM), and it is found that heat treatments were effective to change the phase transformation behavior, microstructure, and superelasticity under compression for SLM Ni 50.4 Ti 49.6 . Detailed results based on EBSD demonstrated that, for SLM Ni 50.4 Ti 49.6 during solid solution and aging (450 °C) treatment, the ultrafine cellular and columnar grains (∼16.5 μm) in as-fabricated Ni 50.4 Ti 49.6 became equiaxed grains (∼70.2 μm), and the frequency of low-angle grain boundaries (26.7%→13.5%) and kernel average misorientation (0.37 → 0.21) decreased. The SEM and TEM analyses show that Ti-rich Ti 2 Ni/Ti 4 Ni 2 O x and Ni-rich Ni 4 Ti 3 precipitate phases were formed in the matrix simultaneously. After solid solution treatment, the size and distribution of Ti 2 Ni/Ti 4 Ni 2 O x almost unchanged with aging temperature increasing from 350 °C to 550 °C, however, the size of Ni 4 Ti 3 in aging-treated NiTi samples increased with aging temperature obviously, and it is interesting to find that the distribution of Ni 4 Ti 3 became uneven and dislocation networks were formed in the matrix when the aging treatment reached up to 550 °C, which originated from the internal stress generated by supersaturated Ni atoms. Furthermore, the results of superelasticity for aging-treated NiTi demonstrated that the characteristics of Ni 4 Ti 3 precipitate phase were powerful to influence the process of superelasticity decay/fatigue instead of determining the ultimately recovery strain after 10 compressive cycles. The aging-treated NiTi with evenly-distributed, high-density, and relatively-small Ni 4 Ti 3 precipitate phase shows minimum recovery strain at 1st cycle compression and best superelasticity stability among three aging-treated NiTi, which was attributed to strong obstruction effect of these Ni 4 Ti 3 precipitate for the occurrence of stress-induced martensitic transformation process and formation of dislocations. In contrast, the aging-treated NiTi with unevenly-distributed and low-density Ni 4 Ti 3 precipitate shows maximum recovery strain at 1st cycle compression and worst superelasticity stability. These results in this work can bring some meaningful insights into tailoring the microstructure and superelasticity of SLM NiTi SMAs.

Effect of Solution Treatment on the Microstructure, Phase Transformation Behavior and Functional Properties of NiTiNb Ternary Shape Memory Alloys Fabricated Via Laser Powder Bed Fusion In-Situ Alloying

Effect of solution treatment on the microstructure, phase transformation behaviour and functional properties of NiTiNb ternary shape memory alloys fabricated via laser powder bed fusion in-situ alloying

Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy

Regulation of Microstructure, Phase Transformation Behavior, and Enhanced High Superelastic Cycling Stability in Laser Direct Energy Deposition NiTi Shape Memory Alloys Via Aging Treatment

In-situ alloying of NiTiNb ternary shape memory alloys via laser powder bed fusion using pre-alloyed NiTi and elemental Nb powders: Microstructure, phase transformation behavior and functional properties

Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys

Influence of Nb addition and process parameters on the microstructure and phase transformation behavior of NiTiNb ternary shape memory alloys fabricated by laser powder bed fusion

Effect of Fe Addition on the Microstructure, Transformation Behaviour and Superelasticity of NiTi Alloys Fabricated by Laser Powder Bed Fusion

Microstructure and Phase Transformation Temperature of NiTiNb Shape Memory Alloy Prepared by Laser Solid Forming Using Mixed Powder

Effect of solution treatment and aging on microstructural evolution and mechanical behavior of NiTi shape memory alloy

Microstructure and phase transformation of nickel-titanium shape memory alloy fabricated by directed energy deposition with in-situ heat treatment

Effect of Heat Treatment on Repetitively Scanned SLM NiTi Shape Memory Alloy

Effect of heat treatment on the microstructure and superelasticity of NiTi alloy via selective laser melting

Influence of Heat Treatments on Microstructure and Mechanical Properties of Ti⁻26Nb Alloy Elaborated In Situ by Laser Additive Manufacturing with Ti and Nb Mixed Powder

Formation Mechanism of Heterogeneous Microstructures and Shape Memory Effect in NiTi Shape Memory Alloy Fabricated Via Laser Powder Bed Fusion

Enhancing Thermal Stability of Laser Powder Bed Fusion Fabricated 60niti Alloy Via Nb Alloying

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Tuning the microstructure, martensitic transformation and superelastic properties of EBF3-fabricated NiTi shape memory alloy using interlayer remelting

Effect of Ni content on the transformation behavior and mechanical property of NiTi shape memory alloys fabricated by laser powder bed fusion

In-situ Synchrotron Diffraction Study on the Anisotropic Deformation and Phase Transformation Behaviors in NiTi Shape Memory Alloy Fabricated by Laser Powder Bed Fusion

Heat Treatment of Hot-Isostatic-pressed 60niti Shape Memory Alloy: Microstructure, Phase Transformation and Mechanical Properties