Abstract:Distinctive temperature and stress oscillations can be observed in superelastic shape memory alloys (SMAs) when they subject to displacement-controlled cyclic phase transition. In this paper, we examine the effect of the deformation frequency on the thermal and mechanical responses of the polycrystalline superelastic NiTi rods under stress-induced cyclic phase transition. By synchronized measurement of the evolutions in overall temperature and stress–strain curve over the frequency range of 0.0004–1Hz (corresponding average strain rate range of 4.8×10−5/s–1.2×10−1/s) in stagnant air, it was found that both the temperature evolution and the stress–strain curve vary significantly with the frequency and the number of cycles. For each frequency, steady-state cyclic thermal and mechanical responses of the specimen were reached after a transient stage, exhibiting stabilization. In the steady-state, the average temperature oscillated around a mean temperature plateau which increased monotonically with the frequency and rose rapidly in the high frequency range due to the rapid accumulation of hysteresis heat. The oscillation was mainly caused by the release and absorption of latent heat and increased with the frequency, eventually reaching a saturation value. The variations in the stress responses followed similar frequency dependence as the temperature. The steady-state stress–strain hysteresis loop area, as a measure of the material׳s damping capacity, first increased then decreased with the frequency in a non-monotonic manner. The experimental data were analyzed and discussed based on the simplified lumped heat transfer analysis and the Clausius–Clapeyron relationship, incorporating the inherent thermomechanical coupling in the material׳s response. We found that, for given material's properties and specimen geometries, all such frequency-dependent variations in temperature, stress and damping capacity were essentially determined by the competition between the time scale of the heat release (i.e. the phase transition frequency) and the time scale of the heat transfer to the ambient. The results emphasize that, the two time scales of loading and heat transfer must be clearly specified when characterizing and modeling the cyclic behavior of SMA materials.

Effect of the Thermomechanical Coupling on Fatigue Crack Propagation in NiTi Shape Memory Alloys

Effect of Thermomechanical Coupling on Stress-Induced Martensitic Transformation Around the Crack Tip of Edge Cracked Shape Memory Alloy

Fracture Behavior of the Compact Tension Specimens in NiTi Shape Memory Alloys

Finite Element Simulation of the Influence of TiC Inclusions on the Fatigue Behavior of NiTi Shape-Memory Alloys

Experimental and theoretical investigation of the frequency effect on low cycle fatigue of shape memory alloys

Crack Growth Behavior in NiTi Shape Memory Alloys Under Mode-I Isothermal Loading: Effect of Stress State

Investigation on High Temperature Fatigue-Oxidation Behavior of Ni-based Single Crystal with Film Cooling Holes Considering Arrangement Effect

Thermo-mechanically coupled functional fatigue of NiTi shape memory alloys under multiaxial cyclic loadings

Transient Thermal Fatigue Crack Propagation Behavior of a Nickel-Based Single-Crystal Superalloy

Couple effects of temperature and fatigue, creep-fatigue interaction and thermo-mechanical loading conditions on crack growth rate of nickel-based alloy

Experimental and FEM Analysis of the Fracture Behavior in NiTi Shape Memory Alloys

Quantification of Microscale Factors for Fatigue Failure in NiTi Shape Memory Alloys

Functional Fatigue of NiTi Shape Memory Alloy: Effect of Loading Frequency and Source of Residual Strains

Energy-Based Fatigue Model for Shape Memory Alloys Including Thermomechanical Coupling

Effect of Specimen Thickness on the Fracture Toughness of a NiTi Shape Memory Alloy

Fatigue Crack Propagation Behavior of Tini50.6 Shape Memory Alloy

Effect of Deformation Frequency on Temperature and Stress Oscillations in Cyclic Phase Transition of NiTi Shape Memory Alloy

Multiscale TRIP-based investigation of low-cycle fatigue of polycrystalline NiTi shape memory alloys

Influence of amorphous phase on crack initiation and propagation behaviours in NiTi shape memory alloy based on extended finite element simulation

High-Cycle Fatigue Mechanisms of a NiTi Shape Memory Alloy under Different Mean Strains

Investigation on the fracture behavior of shape memory alloy NiTi