Abstract:A W-band eight-way radial-waveguide power divider with low insertion loss and high power-combining efficiency has been proposed in this paper. The coaxial waveguide has been utilized in the eight-way radial-waveguide power divider as a transition from the rectangular waveguide to radial waveguide. The structure of the coaxial mode transition from the rectangular waveguide to radial waveguide is simple, and its electrical length is much shorter than others’ mode transition, which results a low insertion loss and high power power-combining efficiency. The microwave signal was inputted from the rectangular waveguide (TE10 mode) and transmitted to the radial waveguide (cylindrical TEM mode) through the coaxial waveguide (TEM mode). Finally, the signal in radial waveguide is divided into eight ways with equal power and equal phase by the eight output standard rectangular waveguide. This all-metal waveguide multi-way power divider demonstrates the advantages of easy design and fabrication, large and arbitrary number of combination ports, and a simple and compact structure. To verify the presented power divider, a W-band eight-way power divider is fabricated and measured. The measured results show that, over the frequency range from 82 to 110 GHz, the measured input return loss is greater than 15 dB, the measured average insertion loss is about 9.4 ± 0.5 dB, the phase imbalance is about ± 5°, and the power-combining efficiency is about 91%.

Four-way Waveguide Power Divider Design for W-band Applications

W-band Power Divider Based on H-plane Slot Waveguide Bridge

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

Four-way power divider/combiner based on waveguide-microstrip structure in W-band

A Four-Way All-Metal-Waveguide Power Divider for Millimeter-Wave/Thz Array Application

All-Metal-Waveguide Power Divider with High Power-Combining Efficiency

A compact four-way power combiner/divider in W-Band

A Broadband Waveguide-Based Power Divider in W-band

Novel Broadband Dual-Polarization Four-way Power Divider for Waveguide Array Antennas

Sub-THz Four-Way Waveguide Power Combiner With Low Insertion Loss

The Design of 220GHz Four-way Power Divider Based on E-plane Directional Waveguide Hybrid

Design of Rectangular Waveguide to Microstrip Power Dividers and Their Application As Compact Rectangular Matching Terminations

W-band Longitudinal-Slot Coupling Four-Way SIW Power Combiner/divider

W-band Low-Loss Eight-way Radial-Waveguide Power Divider Based on Coaxial Mode Transition

Four-way Chained Quasi-Planar Power Divider Using Rectangular Coaxial Waveguide

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line

A W-Band E-Plane Waveguide In-Phase Power Divider with Full Bandwidth and High Isolation

W-BAND SIW POWER COMBINER/DIVIDER BASED ON THE ANTIPODAL FIN-LINE SIW-RW TRANSITION AND LONGITUDINAL-SLOT COUPLING TECHNIQUES

Novel Four-Way Slotted-Substrate Integrated Waveguide Power Divider Using Identical Coupling Circuits

Design of a Power Divider for Millimeter Wavelength Applications