Nonfullerene-Based Organic Photodetectors for Ultrahigh Sensitivity Visible Light Detection
Helen Bristow,Polina Jacoutot,Alberto D. Scaccabarozzi,Maxime Babics,Maximilian Moser,Andrew Wadsworth,Thomas D. Anthopoulos,Artem Bakulin,Iain McCulloch,Nicola Gasparini
DOI: https://doi.org/10.1021/acsami.0c14016
2020-10-15
Abstract:It is well established that for organic photodetectors (OPDs) to compete with their inorganic counterparts, low dark currents at reverse bias must be achieved. Here, two rhodanine-terminated nonfullerene acceptors O-FBR and O-IDTBR are shown to deliver low dark currents at −2 V of 0.17 and 0.84 nA cm<sup>–2</sup>, respectively, when combined with the synthetically scalable polymer PTQ10 in OPD. These low dark currents contribute to the excellent sensitivity to low light of the detectors, reaching values of 0.57 μW cm<sup>−2</sup> for PTQ10:O-FBR-based OPD and 2.12 μW cm<sup>−2</sup> for PTQ10:O-IDTBR-based OPD. In both cases, this sensitivity exceeds that of a commercially available silicon photodiode. The responsivity of the PTQ10:O-FBR-based OPD of 0.34 AW<sup>–1</sup> under a reverse bias of −2 V also exceeds that of a silicon photodiode. Meanwhile, the responsivity of the PTQ10:O-IDTBR of 0.03 AW<sup>–1</sup> is limited by the energetic offset of the blend. The OPDs deliver high specific detectivities of 9.6 × 10<sup>12</sup> Jones and 3.3 × 10<sup>11</sup> Jones for O-FBR- and O-IDTBR-based blends, respectively. Both active layers are blade-coated in air, making them suitable for high-throughput methods. Finally, all three of the materials can be synthesized at low cost and on a large scale, making these blends good candidates for commercial OPD applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14016?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14016</a>.Fabrication and characterization of OPDs; <i>J</i>–<i>V</i> characteristics and OPD parameters; optoelectronical measurement conditions and data; and responsivity, damping, TPC, noise power spectra, <i>D</i>*, and GIWAXS measurements (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14016/suppl_file/am0c14016_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology