High-responsivity, High-detectivity Photomultiplication Organic Photodetector Realized by a Metal-Insulator-Semiconductor Tunneling Junction

Linlin Shi,Ning Li,Ting Ji,Ye Zhang,Wenyan Wang,Lin Feng,Rong Wen,Yuying Hao,Kaiying Wang,Furong Zhu,Guohui Li,Beng S. Ong,Yanxia Cui

DOI: https://doi.org/10.48550/arXiv.2110.12839

2021-10-09

Abstract:Organic photodetectors (OPDs) possess bright prospects in applications of medical imaging and wearable electronics due to the advantages such as low cost, good biocompatibility, and good flexibility. Photomultiplication OPDs (PM-OPDs) enabled by the trap-assisted carrier tunneling injection effect exhibit external quantum efficiencies far greater than unity, thus the acquired responsivities are extremely high. However, the reported PM-OPDs with high responsivity performances are all accompanied by high dark currents due to the introduction of carrier traps, which inevitably results in inferior detectivities. In this work, we modify a P3HT:PCBM donor-rich PM-OPD by introducing an atomically thin Al2O3 interfacial layer through the ALD technique, obtaining a high responsivity of 8294 A/W and high detectivity of 6.76*10^14 Jones, simultaneously, both of which are among the highest reported for bulk heterojunction PM-OPDs. Ascribed to the introduction of the atomically thin Al2O3 layer, the metal-insulator-semiconductor (MIS) tunneling junction is formed, which brings forward a suppressed dark current along with an increased amounts of holes tunneling under forward bias. Meanwhile, the weak light detection limit of the modified PM-OPD within the linear response range reaches the level of nW/cm2. Based on the proposed PM-OPD, a proof-of-concept image sensor with 26*26 pixels is demonstrated, which can respond to both ultraviolet light and visible light. The PM-OPD based sensor arrays can find broad applications for medical imaging, wearable electronics, etc.

Applied Physics,Optics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to reduce the dark current while achieving a high responsivity and a high detectivity in organic photodetectors (OPDs). Traditional high - responsivity photomultiplier organic photodetectors (PM - OPDs) introduce carrier traps. Although they can achieve an extremely high responsivity, they also lead to a relatively high dark current, which will reduce the detection performance of the device and its weak - light detection ability. The paper proposes a method of inserting an atomically - thin Al2O3 layer between the anode buffer layer and the donor - rich P3HT:PC71BM mixture to form a metal - insulator - semiconductor (MIS) tunneling junction, so as to simultaneously achieve a high responsivity and a high detectivity and significantly reduce the dark current. This method not only improves the performance of the photodetector, but also enhances its weak - light detection ability and linear dynamic range (LDR), and this method also has general applicability to other polymer OPD devices.