High-Detectivity Non-Fullerene Organic Photodetectors Enabled by a Cross-Linkable Electron Blocking Layer

Zhiming Zhong,Feng Peng,Zhenqiang Huang,Lei Ying,Gang Yu,Fei Huang,Yong Cao
DOI: https://doi.org/10.1021/acsami.0c13833
2020-09-11
Abstract:The anode interlayer plays a critical role in the performance of organic photodetectors, which requires sufficient electron-blocking ability to simultaneously attain a high photocurrent and low dark current. Here, we developed two cross-linkable polymers, which can be deposited on the top of the widely used poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) and form a robust layer that can effectively suppress the electron injection from the anode under reverse bias. The optimized device with the resulting cross-linkable XP2 exhibited the lowest dark current density of 5.81 × 10<sup>–9</sup> A cm<sup>–2</sup> at −0.1 V, which is about 2 orders of magnitude lower than the control devices. A remarkable responsivity of 0.5 A W<sup>–1</sup> and a detectivity of &gt;1 × 10<sup>13</sup> Jones at a near-infrared wavelength of 800 nm were achieved. Of particular importance is that the resulting device exhibited a linear dynamic range of &gt;135 dB associated with a high working frequency that is shorter than typical commercial digital imagers. The planar heterojunction devices demonstrate that the dark current is closely correlated to the charge generation, which relied on the highest occupied molecular orbital energy levels of the developed cross-linked interlays. The Mott–Schottky analysis revealed that the optimized cross-linked interlayer increased the depletion width of the devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13833?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13833</a>.Synthesis routines of XP1, XP2, and PFT-OEHp; solvent rinsing tests; cyclic voltammetry measurement; AFM images; EQE spectra; optimization of XP2; device performance with inverted structure; detailed Mott–Schottky analysis; and performance of peer OPDs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13833/suppl_file/am0c13833_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?