Abstract:Highly sensitive near-infrared (NIR) photodetectors have attracted extensive attention due to their wide applications in thermal imaging, night vision and human health monitoring. Organic phototransistors (OPTs) are an important type of photodetector with three-terminal contact, which provides high sensitivity and tunable gain with an external quantum efficiency (EQE)>100% by controlling unbalanced charge transport through an optically controlled gate terminal. Thus, NIR OPTs are considered as a promising alternative NIR light detecting technology to conventional inorganic NIR phototransistors. The design and fabrication flexibility provided by the organic semiconductors and solution processes also have significant cost benefit, creating next-generation large-area, low-cost and flexible NIR photodetectors. However, now the performance of NIR-OPT is not high enough, which is still far from practical applications. Low field-effect mobility, limited exciton dissociation, and poor NIR light absorption are the main reasons to hamper the performance of NIR OPTs. A key technical development to circumvent this hurdle is to create an organic channel layer with ordered microstructure to provide high field-effect mobility and a smart device design to enhance exciton dissociation. In this work, an air stable conjugated semiconducting polymer of diketopyrrolopyrrole-dithienylthieno[3,2-b]thiophene (DPP-DIT) with narrow band gap was selected as the NIR light response medium. The DPP-DI"T nanowire network was obtained by a solution-processed and scalable approach called polymer-matrix-mediated molecular self-assembly. The matrix polymer of polystyrene (PS) was selectively removed from the resulted DPP-DTT:PS blend film, leaving the pristine DPP-DIT nanowire network thin film as the active channel layer for the NIR OPTs. The electrical properties and NIR response of the OPTs based on DPP-DTT nanowire network were studied. It is found that the pristine DPP-DTT nanowire network layer exhibited a typical p-type field-effect transport, showing the hole mobility of >1 cm(2)/(V s) and on/off ratio >10(6). These devices also showed sensitive MR response with photoresponsivity (R) of 336 A/W and specific detectivity (D*) of 5.6x10(12) Jones under MR light intensity of 8 mu W/cm(2). To further improve the MR photodetection of the DPP-DTT nanowire network OPTs. zinc oxide (ZnO) nanoparticles were introduced into the devices as electron acceptor material. A small amount of ZnO nanoparticles (1.0 mg/mL) were spin coated onto the DPP-DIT nanowire network to increase the separation efficiency of photodenerated excitons and then capture the photogenerated electrons in trap sites, thereby minimizing the negative impact of photogenerated electrons on hole transport in the MR OPTs. As a result, the MR photodetection of the ZnO-modified OPTs was significantly improved. The photosensitivity of ZnO-modified devices reaches as high as 10(7), which is increased by about 4 to 5 orders of magnitude compared with the pristine DPP-DTT nanowire network NIR OPTs. Correspondingly, the R and D of ZnO-modified NIR OPTs have been also enhanced. The maximum R value was increased to 721 A/W, which is more than twice the R value of the pristine DPP-DTT nanowire network MR OPTs. It is noted that such a large R value has achieved the performance level of conventional inorganic MR phototransistors. Moreover, the maximum D* of the ZnO-modified NIR OPTs reaches 1.3 x10(13) Jones under the NIR intensity of 8 mu W/cm(2). Therefore, this work provides a good idea for the structural design and device performance optimization of high-performance NIR OPTs.

Improved performance of ZnO based inverted organic photodetectors with morphological and interfacial modification

Facile light exposure of zinc oxide via interfacial engineering for boosting responsivity and detectivity in organic photodetectors

Inorganic Nanoparticles and Interface Layer Synergistically Improve Performance of Near-infrared Organic Photomultiplication Photodetector

Enhancing the Performance of Photomultiplication-Type Organic Photodetectors Using Solution-Processed ZnO As an Interfacial Layer

Achieving High-detectivity Near Infrared Organic Photodetectors through Optimizing Film Thickness and Polymer Molecular Weight

Improved Photomultiplication In Inverted-Structure Organic Photodetectors Via Interfacial Engineering

Enhancing performance of organic photovoltaic and photodetector devices using non-atomically doped ZnO electrodes with superior optical properties

Highly Sensitive UV–Vis‐to‐Near‐Infrared Organic Photodetectors Employing ZnO: Polyethylenimine Ethoxylated Composite as Hole‐Blocking Layer

ZnO Nanoparticles Enhanced Near-Infrared Photodetection in Organic Phototransistors Based on Narrow Bandgap Polymer

Overall Enhanced Performance of Polymer Photodetectors by Co‐Modifying ITO with PEIE and ZnO

High Sensitivity and Fast Response Sol-Gel ZnO Electrode Buffer Layer Based Organic Photodetectors with Large Linear Dynamic Range at Low Operating Voltage

The improvement of polymer photodetector based on 1D-ZnO nanorod arrays/0D-ZnO quantum dots composite film

Enhanced Detectivity of Organic Photodetectors with a Non-Conjugated Polymer Additive

A Direct surface modification strategy of ITO anodes enables high-performance organic photodetectors

Preparation and performance enhancement study of organic ZnO/Au/PEDOT:PSS heterojunction UV photodetector

Performance enhancement of an organic photodetector enabled by NPB modified hole transport layer

Low Dark-Current and High-Photodetectivity Transparent Organic Ultraviolet Photodetector by Using Polymer-Modified ZnO As the Electron Transfer Layer.

Improving Performance of Organic Photodetectors Based on Trap Assisted Photomultiplication Through Adjusting Photogenerated Carrier Distributions

Boosting the Performance of Organic Photodetectors with a Solution‐Processed Integration Circuit toward Ubiquitous Health Monitoring

High-Performance Polymer Photodetector Using the Non-Thermal-and-Non-Ultraviolet-Ozone-Treated SnO 2 Interfacial Layer

High‐Performance Polymer Photodetectors Using ZnO Nanocrystal Trap States