Abstract:Highly sensitive near-infrared (NIR) photodetectors have attracted extensive attention due to their wide applications in thermal imaging, night vision and human health monitoring. Organic phototransistors (OPTs) are an important type of photodetector with three-terminal contact, which provides high sensitivity and tunable gain with an external quantum efficiency (EQE)>100% by controlling unbalanced charge transport through an optically controlled gate terminal. Thus, NIR OPTs are considered as a promising alternative NIR light detecting technology to conventional inorganic NIR phototransistors. The design and fabrication flexibility provided by the organic semiconductors and solution processes also have significant cost benefit, creating next-generation large-area, low-cost and flexible NIR photodetectors. However, now the performance of NIR-OPT is not high enough, which is still far from practical applications. Low field-effect mobility, limited exciton dissociation, and poor NIR light absorption are the main reasons to hamper the performance of NIR OPTs. A key technical development to circumvent this hurdle is to create an organic channel layer with ordered microstructure to provide high field-effect mobility and a smart device design to enhance exciton dissociation. In this work, an air stable conjugated semiconducting polymer of diketopyrrolopyrrole-dithienylthieno[3,2-b]thiophene (DPP-DIT) with narrow band gap was selected as the NIR light response medium. The DPP-DI"T nanowire network was obtained by a solution-processed and scalable approach called polymer-matrix-mediated molecular self-assembly. The matrix polymer of polystyrene (PS) was selectively removed from the resulted DPP-DTT:PS blend film, leaving the pristine DPP-DIT nanowire network thin film as the active channel layer for the NIR OPTs. The electrical properties and NIR response of the OPTs based on DPP-DTT nanowire network were studied. It is found that the pristine DPP-DTT nanowire network layer exhibited a typical p-type field-effect transport, showing the hole mobility of >1 cm(2)/(V s) and on/off ratio >10(6). These devices also showed sensitive MR response with photoresponsivity (R) of 336 A/W and specific detectivity (D*) of 5.6x10(12) Jones under MR light intensity of 8 mu W/cm(2). To further improve the MR photodetection of the DPP-DTT nanowire network OPTs. zinc oxide (ZnO) nanoparticles were introduced into the devices as electron acceptor material. A small amount of ZnO nanoparticles (1.0 mg/mL) were spin coated onto the DPP-DIT nanowire network to increase the separation efficiency of photodenerated excitons and then capture the photogenerated electrons in trap sites, thereby minimizing the negative impact of photogenerated electrons on hole transport in the MR OPTs. As a result, the MR photodetection of the ZnO-modified OPTs was significantly improved. The photosensitivity of ZnO-modified devices reaches as high as 10(7), which is increased by about 4 to 5 orders of magnitude compared with the pristine DPP-DTT nanowire network NIR OPTs. Correspondingly, the R and D of ZnO-modified NIR OPTs have been also enhanced. The maximum R value was increased to 721 A/W, which is more than twice the R value of the pristine DPP-DTT nanowire network MR OPTs. It is noted that such a large R value has achieved the performance level of conventional inorganic MR phototransistors. Moreover, the maximum D* of the ZnO-modified NIR OPTs reaches 1.3 x10(13) Jones under the NIR intensity of 8 mu W/cm(2). Therefore, this work provides a good idea for the structural design and device performance optimization of high-performance NIR OPTs.

The improvement of polymer photodetector based on 1D-ZnO nanorod arrays/0D-ZnO quantum dots composite film

Interfacial Electron Transfer of P3HT/PDI/ZnO Nanocomposite and Its Application in Visible-Light Detection

High‐Performance Polymer Photodetectors Using ZnO Nanocrystal Trap States

The improvement of UV photodetection based on polymer/ZnO nanorod heterojunctions

Engineering of Interfacial Electron Transfer from Donor-Acceptor Type Organic Semiconductor to Zno Nanorod for Visible-Light Detection

Ultraviolet–visible photodetectors based on surface plasmon-polymer coupled inorganic/organic thin film heterojunction

ZnO Nanoparticles Enhanced Near-Infrared Photodetection in Organic Phototransistors Based on Narrow Bandgap Polymer

A ZIF-8@H:ZnO core–shell nanorod arrays/Si heterojunction self-powered photodetector with ultrahigh performance

Ultrahigh Gain Polymer Photodetectors with Spectral Response from UV to Near‐Infrared Using ZnO Nanoparticles As Anode Interfacial Layer

High Performance 0D ZnO Quantum Dot/2D (PEA)2PbI4 Nanosheet Hybrid Photodetectors Fabricated via a Facile Antisolvent Method

Piezo-phototronic effect enhanced performance of a p-ZnO NW based UV–Vis–NIR photodetector

High-performance UV–Vis–NIR Photodetectors Based on Perovskite/pdpp3t Polymer Composites

Preparation of AZO:PDIN hybrid interlayer materials and application in high-gain polymer photodetectors with spectral response from 300 nm to 1700 nm

Overall Enhanced Performance of Polymer Photodetectors by Co‐Modifying ITO with PEIE and ZnO

High Performance CsPbBr3 Quantum Dots Photodetectors by Using Zinc Oxide Nanorods Arrays As an Electron-Transport Layer

High-Performance Near-Infrared Photodetectors Based on the Synergy Effect of Short Wavelength Light Filter and Long Wavelength Response of a Perovskite/Polymer Hybrid Structure

The Improved Photoresponse Properties of Self-Powered NiO/ZnO Heterojunction Arrays UV Photodetectors with Designed Tunable Fermi Level of ZnO

Organic-inorganic Hybrid Heterostructures Towards Long-Wavelength Photodetectors Based on InGaZnO-Polymer

Inorganic Nanoparticles and Interface Layer Synergistically Improve Performance of Near-infrared Organic Photomultiplication Photodetector

High-Performance Near-Infrared Photodetector Based on PbS Colloidal Quantum Dots/ZnO-Nanowires Hybrid Nanostructures

Tuning the Properties of a Self-Powered UV Photodetector Based on ZnO and Poly(3,4-Ethylenedioxythiophene): Poly(styrenesulfonate) by Hydrogen Annealing of ZnO Nanorod Arrays