Abstract:ABSTRACT In this paper, a design procedure of a compact broadband microstrip diplexer working on the Very High Frequency (VHF)/Ultrahigh Frequency (UHF) band is proposed. The diplexer consists of a fourth‐order Butterworth Low‐Pass Filter (LPF) and a sixth‐order elliptic High‐Pass Filter (HPF). The two filters are located on two substrates with a common ground. A microstrip‐to‐coaxial structure is utilized to transmit the power flow between the two substrates. For miniaturization, the utilized ideal capacitors and inductors are realized by the commercial lumped‐element capacitors and the curved microstrip line sections, respectively. All the middle design and rapid optimization processes from the schematic simulation by Advanced Design System (ADS) to the circuit simulation by CST STUDIO SUITE (CST) are given in the article. A prototype is fabricated and measured. The testing results are consistent with the simulation. The diplexer can operate at 225–775 and 880–2500 MHz. The insertion losses are 0.8 ± 0.3 and 0.9 ± 0.4 dB in the two working bandwidths. The isolation bandwidth of −20 dB level is as small as 105 MHz. The roll‐off is also sharp that the related bandwidths corresponding to the attenuation level −3 to −20d B are 90 and 30 MHz to the high and low bands, respectively. Besides, the return loss and isolation are larger than 10 and 20 dB approximately. The diplexer has a volume of 0.065 λ g × 0.156 λ g @775 MHz, which can be utilized to feed the miniaturized broadband VHF/UHF antenna system.

Compact and High Isolated Triangular Split-Ring Diplexer

A Compact and High-Isolated Multiresonator-Coupled Diplexer

An LTCC duplexer for GSM/DCS applications

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Design of Compact Superconducting Diplexer with Spiral Short-Circuited Stubs

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

High Selective Microstrip Bandpass Filter and Diplexer with Common Magnetic Coupling

High Selective Microstrip Bandpass Filter and Diplexer With Mixed Electromagnetic Coupling

A Novel Design for a Planar Microstrip Triple Diplexer With Enhanced Selectivity Using Highly-Selective Bandpass Filters

Compact Diplexer with High Isolation and Wide Stopband Based on SIRs

A compact diplexer using meander-line resonators and a new coupled junction for 5G and WiMAX application

Miniaturized Single-Ended and Balanced Dual-Band Diplexers Using Dielectric Resonators

Low‐loss compact diplexer based on complementary spiral resonators

A Narrowband Superconducting Quadruplexer with High Isolation

A novel design of 4-port diplexer with high isolation

High Isolation And Common-Mode Suppression Balanced-To-Balanced Microstrip Diplexer With Mixed Coupling

Compact Superconducting Diplexer Design with Conductor-Backed Coplanar Waveguide Structures

Design and Rapid Optimization Procedure of a Compact Broadband Microstrip Diplexer for VHF/UHF Band