Abstract:Silicon carbide (SiC) ceramic lattice structures (CLSs) have a rising requirement in high-value engineering fields owing to their superior specific strength and multiple thermal properties. With the advent of additive manufacturing (AM) techniques such as laser powder bed fusion (LPBF), the manufacture of complex SiC CLSs has become possible. Compared with conventional lattices, the combination of triply periodic minimal surface (TPMS) structures with outstanding properties and SiC ceramic materials makes it a promising candidate for wider applications. In this work, the Gyroid-type TPMS was introduced to the SiC CLSs, and a novel integrated procedure for the AM fabrication, experimental analysis of mechanical performance and fracture mechanisms, and related finite element (FE) simulated verification of Si/SiC TPMS CLSs were systematically conducted. The results indicate that the SiC Gyroid-type CLSs prepared via the LPBF and liquid silicon infiltration process have high manufacturing accuracy and a low shrinkage rate with most less than 6%. The experimental elastic modulus and compressive strength of Si/SiC CLSs increase from 121.9 MPa to 932.0 MPa and 2.3 MPa to 16.3 MPa when the volume fraction increases from 25% to 55%, respectively. The FE simulation model was established to verify and predict the mechanical and fracture behaviors for SiC-based lattices, and the FE results are consistent with the experimental findings with most deviations less than 20%. Besides, the fracture zones of SiC Gyroid-type CLSs show a transition from 45° plane to vertical plane when the volume fraction increases from 25% to 55%. The reason is related to the transition of the material feature from the distribution of the close-packed plane to the solid material, and it was verified through FE simulation and theoretical model. In general, this research provides valuable guidance on optimization of the design and additive manufacturing for SiC-based ceramic lattice structures.

In-situ Fabrication of Laminated SiC/TiSi2 and SiC/Ti3SiC2 Ceramics by Liquid Silicon Infiltration

In Situ Toughened Two-Phase B-12(C, Si, B)(3)-SiC Ceramics Fabricated Via Liquid Silicon Infiltration

Fabrication of Ti 3SiC 2 modified C/C-SiC composites by liquid silicon infiltration

Structural Design of Laminated B4C/TiC Composite Fabricated by Reactive Melt Infiltration

Three-dimensional printing of Ti3SiC2-based ceramics

A Novel In-Situ Synthesis Route of Ti3SiC2-SiC Composite by Liquid Silicon Infiltration

PREPARATION OF TiC/SiC AND TiN/SiC COMPOSITE CERAMICS FROM LIQUID SILICON INFILTRATION

Effect of TiO2 Addition on the Properties of Ti3Si(Al)C2 Based Ceramics Fabricated by Reactive Melt Infiltration

Fabrication and Characterization of a Carbon Fibre Reinforced Carbon–silicon Carbide–titanium Silicon Carbide Hybrid Matrix Composite

SiC Ceramics Joined with an In-Situ Reaction Gradient Layer of TiC/Ti3SiC2 and Interface Stress Distribution Simulations

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Design, Fabrication and Properties of Layered SiC/TiC Ceramic with Graded Thermal Residual Stress

In-situ Formation of Ti3SiC2 Interphase in SiCf/SiC Composites by Molten Salt Synthesis

Thickness-dependent Phase Evolution and Bonding Strength of SiC Ceramics Joints with Active Ti Interlayer

Fabrication of Tubular SiC/Si Ceramic Composites by Carbon Template Conversion

Structural Design and Energy Absorption Mechanism of Laminated SiC/BN Ceramics

Improvement of the Mechanical and Thermophysical Properties of C/SiC Composites Fabricated by Liquid Silicon Infiltration

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ti3SiC2 CERAMICS

Si/SiC ceramic lattices with a triply periodic minimal surface structure prepared by laser powder bed fusion

Freeform Fabrication of Ti3SiC2 Powder-Based Structures

Bio-Inspired Design of Sicf-Reinforced Multi-Layered Ti-Intermetallic Composite