Abstract:To enhance the fracture toughness of B4C ceramics, B4C/TiB2 ceramics with excellent performance were prepared by using TiO2 as the addition item and using spark plasma sintering to introduce TiB2 based on in situ reaction, which was compared with ceramics directly introduced with TiB2, the impacts of TiO2 content, temperature and holding time on B4C/TiB2 ceramics were studied, and the toughening mechanism of B4C/TiB2 ceramics in situ reaction was discussed. The results showed that compared with the ceramics directly introduced with TiB2, B4C/TiB2 ceramics with reinforcement phase TiB2 introduced through in‐situ reaction were easier to obtain higher relative density and better properties. Due to the existence of a discharge effect and the application of pulse current, B4C/TiB2 ceramics with excellent comprehensive properties can be prepared at lower temperatures and short time. When 15 vol% TiO2 was added, the temperature was 1750°C and the holding time was 10 min, the comprehensive properties were better, and their relative density, Vickers hardness, flexural strength, and fracture toughness were 98.5%, 27.72 GPa, 474 MPa, and 5.08 MPa·m1/2, respectively. Toughening mechanisms such as crack deflection, crack branching, and crack bridging improved the fracture toughness.

In Situ Toughened Two-Phase B-12(C, Si, B)(3)-SiC Ceramics Fabricated Via Liquid Silicon Infiltration

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Study on the toughening mechanism of in-situ synthesis (TixZr1−x)B2 in solid-state sintered SiC composite ceramics

Toughening mechanisms of Ti3SiC2- and TiB2- toughened SiC matrix prepared via reactive melt infiltration

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering

Toughness and R-curve behaviour of laminated Si3N4/SiCw ceramics

A facile preparation of multi-scale BN/SiC ceramic with high toughness by vacuum-assisted filtration

High toughness and R-curve behaviour of laminated SiC/graphite ceramics

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system

Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosity and High Strength

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering

Mechanical properties and microstructure of laminated Si3N4+SiCw/BN+Al2O3 ceramics densified by spark plasma sintering

Toughening mechanism of B4C/TiB2 ceramic materials by in situ reaction via spark plasma sintering

Fabrication of SiC whisker reinforced laminated Si3N4/BN ceramics by spark plasma sintering

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

B4C-based hard and tough ceramics densified via spark plasma sintering using a novel Mg2Si sintering aid

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Novel (Zr, Ti)B2-(Zr, Ti)C-SiC ceramics via reactive hot pressing

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

β→α Phase Transformation and Properties of Solid-State-Sintered SiC Ceramics with TaC Addition