Abstract:In this paper, a three-dimensional (3D) numerical model coupling of CFD-DEM with chemical reaction has been developed to study the combustion process in lab-scale bubbling fluidized beds. The gas phase is modeled with k-c turbulent model and the solid phase is modeled with discrete element method (DEM). The dense gas-solid flow, heat transfer, and comprehensive chemical reaction are simultaneously considered. The reactive submodel includes the fuel pyrolysis, combustion of char and volatiles (CO, H-2, CH4, tar), formation and reduction of gaseous pollutants (NO, N2O, and SO2). The established model is first validated by the simulation of the combustion of single char particle in a quasi-3D fluidized bed. The flow patterns, distributions of particle temperature and combustion gas compositions are comparatively analyzed. The heat released by char combustion raises the temperature of surrounding particles, and meanwhile, CO and CO2 are generated at the same position as char particle. The variations of temperature, char particle diameter, and CO2 concentration with time are compared with experimental data, showing good agreements. Based on model validation, the simulations are performed to study the coal combustion in a 3D cylindrical fluidized bed. The computational domain contains about 110,000 spherical particles. The general flow pattern, distributions of gas and solid temperature, and concentrations of gas compositions inside the reactor are obtained. The effects of excess air coefficients on the particle temperature and gaseous pollutants emissions are also analyzed. The results show that the particle temperature rises rapidly in the initial stage and then tends to be a stable value, accompanied by the oscillation throughout the evolution. An increase in excess air coefficient Causes the increase of emissions of NO, N2O, and SO2. The current numerical model presents a promising way to predict the flow behaviors and reactive characteristics for dense particle reaction system at both macro- and meso-scales. (C) 2019 Elsevier B.V. All rights reserved.

Simulation of Chemical Reaction Process in Gas-Particle CFB Downers by Anisotropic Turbulent Mass Transfer Model

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Evaluation of non-equilibrium transfer-reaction characteristic in downer fluidized beds via simulation based on local structure

CFD simulation of hydrodynamics of gas-solid multiphase flow in downer reactors: Revisited

CFD simulation of hydrodynamics in downer reactors

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD SIMULATION OF FCC PROCESS IN DOWNER REACTORS

Particle-scale and Sub-Grid Drag Models Coupled CFD for Simulating the CO Methanation in a CFB Riser

Computational Fluid Dynamics Modeling and Mass Transfer Study of an in Situ Gas Production Process

Numerical Simulation of Gas-particle Hydrodynamics in CFB

Computational fluid dynamic modeling of hydrodynamics in downer reactors

Coupling of CFD-DEM and Reaction Model for 3D Fluidized Beds

Modeling and Simulation of Chemically Reacting Flows in Gas-Solid Catalytic and Non-Catalytic Processes

Analysis of Mass Diffusion Theory and Models for High-Temperature Multi-Component Gases

Numerical Simulation of an Entrained Flow Gasifier by an Eulerian Model

Multi-scale Heat Transfer in Fluidized Bed Reactors by Eulerian CFD Modeling

Simulation of CO 2 capture process in gas-solid bubbling fluidized bed by computational mass transfer

Numerical Simulation of Particulate Flows in CFB Riser with Drag Corrections Based on Particle Distribution Characterization

Simulation of Dense Gas-Particle Flow Using a USM-θ Model, Combined with a Frictional Stress Model

Numerical Simulation of Gas-solid Flow Behaviours in Desulfurization Tower Based on Monte Carlo

Comparative Study of Two Fluid Model and Dense Discrete Phase Model for Simulations of Gas–solid Hydrodynamics in Circulating Fluidized Beds