Abstract:A k-epsilon-Theta-k(p) model was proposed to describe the complicated two-phase flow in downers, taking into account the fast and dense gas-solid flows in downers, transport phenomena caused by turbulence mechanism and collisions between particles, i.e., a k-epsilon turbulence model for gas phase, a k(p) turbulence model, and a kinetic theory description of solid stresses characterized by pseudo-temperature of particles (Theta) for solid phase. A FORTRAN code was developed to solve the steady-state 3D flow fields of two-phase flows numerically. To validate the reliability of the k-epsilon-Theta-k(p) model, the gas-solid flows in (1) the developing and fully developed regions of a downer (140 mm ID) and (2) solids jet development in the entrance region of a downer (92 mm ID) were simulated. The predicted results had satisfactory agreement with a large quantity of experimental data, i.e., axial and radial distributions of local solids fraction, local particle velocity, and pressure. In particular, the above model and corresponding simulations were also implemented successfully using CFX 4.2/4.3, a commercial software developed by AEA Technology Company. Furthermore, the CFX code was applied to predict the radial flow structure in a downer of 418 mm ID, which was validated by the ongoing experiments in the corresponding experimental setup. Further analysis of the simulated data also showed that the diffusion coefficient of particles is strongly correlated with the local solids fraction. A lower solids fraction corresponds to a larger radial diffusion coefficient. With the increase of solids fraction, the diffusion coefficient decreases sharply when the solids fraction is less than 0.05, and then levels off. This means that the local solids fraction has an important effect on the dispersion behavior of particles. This predicted result gives reasonable agreement with the experimental results in the literature.

CFD SIMULATION OF FCC PROCESS IN DOWNER REACTORS

CFD simulation of hydrodynamics in downer reactors

CFD–DEM Simulation of Gas–solid Reacting Flows in Fluid Catalytic Cracking (FCC) Process

CFD-DEM Simulation of Gas-Solid Reacting Flows in Catalytic Reactor

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Computational fluid dynamic modeling of hydrodynamics in downer reactors

CFD simulation of hydrodynamics of gas-solid multiphase flow in downer reactors: Revisited

Understanding Riser and Downer Based Fluid Catalytic Cracking Processes by A Comprehensive Two-Dimensional Reactor Model

Modeling of the Riser-Downer-Coupling Reactor

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

COMPARISON OF THE FCC PROCESS IN RISER AND DOWNER REACTORS

A Gas-solid two-phase flow-reaction model of FCC riser reactors and numerical simulation for them: I . Development of the gas-solid two-phase flow-reaction model

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (I) Turbulent Gas-Solid Flow-Reaction Model

Study on the FCC process in a novel riser-downer-coupling reactor (II): Simulation and hot experiments

Numerical Simulation of the Turbulent Gas–solid Flow and Reaction in a Polydisperse FCC Riser Reactor

Dynamic Modeling and Simulation of FCCU Reactor-Regenerator System

3D virtual full-loop CFD simulation of industrial two-stage FCC reaction–regeneration system

CFD-DEM Simulation of Clustering Phenomena in Riser and Downer

Prediction of molecular distribution and temperature profile of FCC process through molecular-level kinetic modeling