Abstract:A k-epsilon-Theta-k(p) model was proposed to describe the complicated two-phase flow in downers, taking into account the fast and dense gas-solid flows in downers, transport phenomena caused by turbulence mechanism and collisions between particles, i.e., a k-epsilon turbulence model for gas phase, a k(p) turbulence model, and a kinetic theory description of solid stresses characterized by pseudo-temperature of particles (Theta) for solid phase. A FORTRAN code was developed to solve the steady-state 3D flow fields of two-phase flows numerically. To validate the reliability of the k-epsilon-Theta-k(p) model, the gas-solid flows in (1) the developing and fully developed regions of a downer (140 mm ID) and (2) solids jet development in the entrance region of a downer (92 mm ID) were simulated. The predicted results had satisfactory agreement with a large quantity of experimental data, i.e., axial and radial distributions of local solids fraction, local particle velocity, and pressure. In particular, the above model and corresponding simulations were also implemented successfully using CFX 4.2/4.3, a commercial software developed by AEA Technology Company. Furthermore, the CFX code was applied to predict the radial flow structure in a downer of 418 mm ID, which was validated by the ongoing experiments in the corresponding experimental setup. Further analysis of the simulated data also showed that the diffusion coefficient of particles is strongly correlated with the local solids fraction. A lower solids fraction corresponds to a larger radial diffusion coefficient. With the increase of solids fraction, the diffusion coefficient decreases sharply when the solids fraction is less than 0.05, and then levels off. This means that the local solids fraction has an important effect on the dispersion behavior of particles. This predicted result gives reasonable agreement with the experimental results in the literature.

COMPARISON OF THE FCC PROCESS IN RISER AND DOWNER REACTORS

Study on the FCC process in a novel riser-downer-coupling reactor (II): Simulation and hot experiments

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Radial behavior in riser and downer during the FCC process

Modeling of the Riser-Downer-Coupling Reactor

Understanding Riser and Downer Based Fluid Catalytic Cracking Processes by A Comprehensive Two-Dimensional Reactor Model

Study on the FCC process in a novel riser-downer-coupling reactor (I): Hydrodynamics and mixing behaviors

A gas-solid two-phase flow-reaction model of FCC riser reactors and its numerical simulation IV. Numerical modeling on the elimination of back-mixing in the feeding zone of riser reactor

A Dispersion Model for Fluid Catalytic Cracking Riser and Downer Reactors

CFD SIMULATION OF FCC PROCESS IN DOWNER REACTORS

Novel Design And Modeling Of A Coupled High-Density Downer-Riser Reactor

Effect Of The Scale-Up Process On The Reactor Performance Within The Riser: Simulation Using Ozone Decomposition

THE APPLICATION OF THE DENSE GAS THEORY FOR THE NUMERICAL SIMULATION OF FCC RISER REACTOR

Study on the FCC process of a novel riser-downer coupling reactor (III): Industrial trial and-CFD modeling

Modeling the hydrodynamics in a coupled high-density downer-to-riser reactor

Advanced model for turbulent gas–solid flow and reaction in FCC riser reactors

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

CFD simulation of hydrodynamics in downer reactors

APPLICATION OF KINETIC MODEL OF GRANULAR FLOW IN FCC RISER

Downer-to-Riser Coupling Technique for Petroleum Refining