Abstract:The gas-solid flow in a fluidized bed is modelled by a combined approach of discrete particle method and computational fluid dynamics (DPM-CFD), in which the motion of individual particles is obtained by solving Newton's second law of motion and gas flow by the Navier-Stokes equation based on the concept of local average. The coupling between DPM and CFD is achieved directly by applying the principle of Newton's third law of motion to the discrete particle and continuum gas which are modelled at different length and time scales. The equations of motion for a system of particles are solved by a collision dynamic model developed in this work which, in conjunction with the predictor-corrector method, allows stiff particles (K = 50,000 Nm(-1)) to be used with a reasonable computational time step (1.5 x 10(-5) s) while conserving the energy and momentum. The gas-phase equations are solved by the conventional SIMPLE method facilitated with the Crank-Nicolson scheme to give the second order accuracy in the time discretization.The proposed model shows its capacity of simulating the gas fluidization process realistically from a fixed to fully fluidized bed via an incipient fluidization stage. This is done by a series of numerical tests to reproduce the experimental procedures in determining the minimum fluidization velocity of 2400 particles (rho(p) = 2700 kg m(-3), D = 4 x 10(-3) m) in a pseudo-three-dimensional central jet fluidized bed of dimensions 0.9 x 0.15 x 0.004 m. The hysteretic feature of bed pressure drop vs superficial gas velocity curve is obtained for the first time realistically from first principles, with the predicted minimum fluidization velocity in good agreement with experiment. It is demonstrated that the proposed model is able to capture the gas-solid flow features in a fluidized bed from the largest length and time scales relevant to the processing equipment down to the smallest ones relevant to the individual particles. (C) 1997 Elsevier Science Ltd.

Numerical Simulation of Gas-solid Flow Behaviours in Desulfurization Tower Based on Monte Carlo

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

Numerical Simulation Study on the Optimization of Gas-solid Two-phase Flows in a Desulfurization Tower

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

Numerical simulation of gas-liquid flow state in scrubber of novel centrifugal flue gas desuifurization tower

Numerical Simulation of the Flow Field in a Circulating Fluidized Bed Desulfurizer and Its Gas-solid Separation Characteristics

Particle trajectory model desulfurization spray tower used in numerical simulation of flue gas]

Numerical Simulation of Gas-particle Hydrodynamics in CFB

An Exploratory Study of Gas-solid Flow Coupling Characteristics in a Desulfuration Tower

NUMERICAL SIMULATION OF FLUE GAS DESULPHURIZATION PROCESS IN A CIRCULATING FLUIDIZED BED

Numerical Simulation of Flow Field in the Slurry Pond of a Flue-Gas Desulfurization Tower

Numerical simulation research of flow field in ammonia-based wet flue gas desulfurization tower

Numerical Simulation of Flue Gas Desulphurization by Spray Tower

Numerical Simulation for Horizontal -Spraying -Tower Flow of Wet Desulfurization Spray Tower

NUMERICAL SIMULATION OF GAS-LIQUID FLOW IN FLUE GAS DESULFURIZATION REACTOR WITH PYROLUSITE SLURRY

Numerical Simulation on Flow Field in a New Integrative Device for Dust Removal and Desulphurization

Numerical Simulation of a New Horizontal Spray Tower for Sintering Flue Gas Desulfurization

Numerical Simulation of the Gas-Solid Flow in a Fluidized Bed by Combining Discrete Particle Method with Computational Fluid Dynamics

Flow behavior of clusters in circulating fluidized bed simulated by direct simulation Monte Carlo method and large eddy simulation

Gas-solid Two Phase Flow in Internally Circulating Multistage Spouted Desulfurization Towers