Abstract:The process of the fluid catalytic cracking (FCC) is accompanied by complex physical and chemical reactions and phase transition processes. For the FCC process-maximizing isoparaffin process (MIP), coupled simulation and optimization of flow reaction can meet the requirements for the design and operation of high efficiency, low energy consumption, low pollution, and low cost in the catalytic device. A combination of Eulerian-Eulerian model and 11-lump kinetic model is adopted to simulate the flow-reaction process of gas-solid two-phase of an industrial MIP riser reactor. A drag model based on the energy-minimization multiscale model established by Yang is incorporated into FLUENT through a user-defined function (UDF). The temperature distribution of the catalyst and the concentration of each product component at the outlet are in good agreement with the industrial measured data, which indicates that the established coupling model of flow reaction and drag model are reliable and effective. The two operating variables of the catalyst-to-oil ratio and catalyst inlet temperature are explored their effects on the flow-reaction process of FCC gas-solid two-phase. In the prelifting zone, the velocity of catalyst particles presents parabolic distribution. In the first reaction zone, the maximum velocity of catalyst particles is about 1/2 of the radius of the riser. In the second reaction zone, the maximum particle velocity of catalyst is located in the central region, with a slight increase in about 1/2 of the radius of the riser. The increase in catalyst-to-oil ratio leads to the decrease in the yield of diesel oil and the increase in yields of gasoline, liquefied petroleum gas, propylene, and dry gas. The changes in the catalyst inlet temperature affect the product distribution of the outlet component, which can provide an important guiding significance.

Computational Fluid Dynamics Modeling and Mass Transfer Study of an in Situ Gas Production Process

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Modeling and Simulation of Chemically Reacting Flows in Gas-Solid Catalytic and Non-Catalytic Processes

Computational Approach to Characterize the Mass Transfer Between the Counter‐Current Gas‐Liquid Flow

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane

Numerical Simulation of Turbulent Flow and Mixing in Gas-Liquid-Liquid Stirred Tanks

CFD–DEM Modeling of Gas–solid Flow and Catalytic MTO Reaction in a Fluidized Bed Reactor

Computational Model for Predicting the Dynamic Dissolution and Evolution Behaviors of Gases in Liquids

Numerical Simulation of the Gas–Solid Two-Phase Flow-Reaction Process in a Maximizing Isoparaffin Process Reactor

Iterative Multiscale Computational Fluid Dynamics-Single-Particle Model For Intraparticle Transfer And Catalytic Hydrogenation Reaction Of Dimethyl Oxalate In A Fluidized-Bed Reactor

Multi‐scale Study on the Secondary Reactions of Fluid Catalytic Cracking Gasoline

Multi-scale CFD Simulations of Bubbling Fluidized Bed Methanation Process

Numerical computation drives "Transport-reaction" of carbon nanotube growth processes in fluidized bed reactors—A review

3D Numerical Simulation of a Large Scale MTO Fluidized Bed Reactor

Direct Concurrent Multi-Scale CFD Modeling: the Effect of Intraparticle Transfer on the Flow Field in a MTO FBR

A Gas-solid two-phase flow-reaction model of FCC riser reactors and numerical simulation for them: I . Development of the gas-solid two-phase flow-reaction model

Optimization of methane catalytic decomposition in a fluidized bed reactor: A computational approach

Experimental and numerical investigations of motion and mass transfer of single bubbles in a turbulent flow chamber

Numerical exploration of the flow regime transition of a novel catalytic cracking reactor and operation mode analysis