Abstract:In this paper, a three-way reconfigurable power divider/combiner is proposed based on novel switch element with matching network (SEMN) and reconfigurable impedance transformer network (RITN). A good matching performance and a high isolation of the SEMN with one p-i-n diode can be obtained by the parasitic inductance and reverse capacitance of the p-i-n diode involved in matching circuits. With different parameters of one p-i-n diode under forward bias and reverse bias, the reconfigurable impedance matching can be obtained by the RITN with a simple structure. By using four RITNs and nine SEMNs, the three-way reconfigurable power divider/combiner can provide seven different states in the three-path mode, the two-path mode, and the single-path mode. For verification, a 5-GHz three-way reconfigurable power divider/combiner is designed and fabricated. In the three-path mode, measured insertion losses from port 1 to transmission ports (port 2, port 3, and port 4) are less than 0.74 dB and the isolations between transmission ports are higher than 32.1 dB. In the two-path mode with three states, the measured insertion losses are less than 0.93 dB; the isolations between transmission ports, transmission ports and isolation ports, and port 1 and isolation ports are higher than 27.5, 35.1, and 30.5 dB, respectively. In the single-path mode with three states, the measured insertion losses are less than 1.13 dB; the measured isolations between transmission ports and isolation ports are higher than 28.8 dB, and the isolations between port 1 and isolation ports are higher than 28.2 dB at the design frequency.

An approach to 1-to-3 way microstrip balanced-to-balanced power divider/combiner

A New Balanced-to-Balanced Power Divider/Combiner

A Balanced-to-Balanced Power Divider with Arbitrary Power Division

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

An Absorptive Balanced-to-Balanced Power Divider

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

Wideband Single-Ended-to-Balanced Power Divider with Intrinsic Common-Mode Suppression

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

Multi-way Differential Power Divider with Microstrip Output Interfaces

A Wideband Balanced-to-Unbalanced Out-of-Phase Power Divider Based on Hybrid Microstrip/Slotline Structure

A new balanced-to-single-ended (BTSE) power divider

A Three-Way Reconfigurable Power Divider/Combiner

A New Compact Power Divider Based on Capacitor Central Loaded Coupled Microstrip Line

Multilayer Balanced-to-Unbalanced Power Divider with Wideband Transmission Characteristic and Common-Mode Suppression

A MICROSTRIP PROBE COAXIAL WAVEGUIDE POWER DIVIDER/COMBINER

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Millimeter-wave waveguide-based out-of-phase power divider/combiner using microstrip antenna

Miniaturised Wideband Four‐way Out‐of‐phase Power Divider Based on Marchand Balun

A Balanced Tri-band PD Based on Microstrip-slotline Transition Structure Embedded Complementary Split-ring Resonators

A Broad-Band 3-Db In-Phase Divider for Millimeter-Wave Lengths