Abstract:A comprehensive model has been developed to predict uniform corrosion rate of structural steel under the effect of low pH conditions for example, acid rain. Acid rain is mainly caused by emissions of sulphur dioxide (SO2) which reacts with the water droplets in the atmosphere to produce acidic solution which is the primary cause of corrosion of steel structures such as bridges, high value assets, weathering of stone buildings and statues. A five-stage approach was applied to mathematically describe the model as: (i) the growth rate of air-suspended water droplets (i.e. moisture) depending on the condensation/evaporation rate, (ii) the absorption of gas phase SO2 in the droplets forming bisulfite HSO3− ions, (iii) the coalescence of these SO2 absorbed water droplets under the effects of wind speed and gravity, (iv) the deposition rate of SO2 absorbed droplets on steel substrate depending on the inclination and azimuth angles of steel surfaces and, (v) the corrosion rate of steel due to the deposition of these SO2 absorbed droplets. The incorporation of all of the above stages develops a comprehensive corrosion prediction model which includes both the electrochemical parameters and large number of physical, environmental and material parameters. Experiments were performed to analyse the corrosion rate of steel samples by exposing them to moist SO2 corrosion test. A comparative analysis between the modelled predictions and experimental results was performed to verify the reliability of the model. The predictive trends of corrosion rate of steel were also generated for various values of temperature, relative humidity and SO2 mole percentage. This research provides design solutions and guidelines against degradation due to aggressive application environments. Enhanced corrosion resistivity within large structures, installations, automotive, locomotives, aerospace and building with historic biography will aid longevity and cost savings.

Predictive Model for Corrosion Rate of Oil Tubes in CO2/H2 S Coexistent Environment Part Ⅰ :Building of Model

Simulation of CO2 Corrosion of Carbon Steel in High Pressure and High Temperature Environment (HPHT)

A Mechanistic Model for Pipeline Steel Corrosion in Supercritical CO2–SO2–O2–H2O Environments

Predeterminate Model Of Corrosion Rate Of Steel In Concrete

Investigation into main controlling factors and prediction model of L245NS steel corrosion rate in CO2–O2–SO2–H2S–H2O environment

A New Updated Model of CO2/H2S Corrosion in Multiphase Flow

A life prediction model for P110S steel in deep-well environments with H 2 S/CO 2 coexistence based on multi-factor chemometric drive

Numerical Predictions of Uniform CO2 Corrosion in Complex Fluid Domains Using Low Reynolds Number Models

Numerical Predictions of Mild-Steel Corrosion in A H2s Aqueous Environment Without Protective Product Layers

Main control factors and prediction model of flow-accelerated CO2/H2S synergistic corrosion for X65 steel

A Comprehensive Predictive Corrosion Model Incorporating Varying Environmental Gas Pollutants Applied to Wider Steel Applications

Effect of CO2 Partial Pressure on CO2/H2S Corrosion of Oil Tube Steel

Corrosion Prediction Models for Steel Bars in Chloride-Contaminated Concrete: a Review

Effect of Temperature and Pressure on CO2/H2S Corrosion Rate of N80 Steel

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

A fully coupled model of hydrodynamic-chemical-electrochemical processes for CO2 uniform corrosion in multi-physics environment

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Effect of carbon dioxide on corrosion of tubular steel in high hydrogen sulfide and carbon dioxide environments

CORROSION BEHAVIOR OF X70 PIPELINE STEEL AND CORROSION RATE PREDICTION UNDER THE COMBINATION OF CORROSIVE MEDIUM AND APPLIED PRESSURE

A Predictive Model for Corrosion Fatigue Crack Growth Rates in RPV Steels Exposed to PWR Environments

Multi-Physics Coupling Analysis on the Time-Dependent Localized Corrosion Behavior of Carbon Steel in CO2-H2O Environment