Abstract:Tissue engineering scaffolds require a controlled pore size and structure to host tissue formation. Supercritical carbon dioxide (scCO2) processing may be used to form foamed scaffolds in which the escape of CO2 from a plasticized polymer melt generates gas bubbles that shape the developing pores. The process of forming these scaffolds involves a simultaneous change in phase in the CO2 and the polymer, resulting in rapid expansion of a surface area and changes in polymer rheological properties. Hence, the process is difficult to control with respect to the desired final pore size and structure. In this paper, we describe a detailed study of the effect of polymer chemical composition, molecular weight and processing parameters on final scaffold characteristics. The study focuses on poly(DL-lactic acid) (PDLLA) and poly(DL-lactic acid-co-glycolic acid) (PLGA) as polymer classes with potential application as controlled release scaffolds for growth factor delivery. Processing parameters under investigation were temperature (from 5 to 55 degrees C) and pressure (from 60 to 230 bar). A series of amorphous PDLLA and PLGA polymers with various molecular weights (from 13 KD to 96 KD) and/or chemical compositions (the mole percentage of glycolic acid in the polymers was 0, 15, 25, 35 and 50 respectively) were employed. The resulting scaffolds were characterised by optical microscopy, scanning electron microscopy (SEM), and micro X-ray computed tomography (microCT). This is the first detailed study on using these series polymers for scaffold formation by supercritical technique. This study has demonstrated that the pore size and structure of the supercritical PDLLA and PLGA scaffolds can be tailored by careful control of processing conditions.

Novel Fabricating Process for Porous Polyglycolic Acid Scaffolds by Melt-Foaming Using Supercritical Carbon Dioxide

Fabrication Of Pcl Scaffolds By Supercritical Co2 Foaming Based On The Combined Effects Of Rheological And Crystallization Properties

Processing and Characterization of Supercritical CO2 Batch Foamed Poly(lactic Acid)/poly(ethylene Glycol) Scaffold for Tissue Engineering Application

Control of pore size and structure of tissue engineering scaffolds produced by supercritical fluid processing.

Preparation of PLGA/β-TCP Composite Scaffolds with Supercritical CO2 Foaming Technique

Fabrication of Super-Hydrophilic and Highly Open-Porous Poly (lactic Acid) Scaffolds Using Supercritical Carbon Dioxide Foaming.

Foaming of PCL-Based Composites Using scCO2: Structure and Physical Properties

Facile Preparation of Open-Cellular Porous Poly (L-Lactic Acid) Scaffold by Supercritical Carbon Dioxide Foaming. for Potential Tissue Engineering Applications

Polymerization of D,L-Lactide and in Situ Fabrication of PDLLA Porous Scaffolds in Supercritical Carbon Dioxide

Fabrication of Functionally Graded Porous Polymer Via Supercritical CO2 Foaming

Synthesis of CS-g-PDLLA Copolymer and In-Situ Fabrication of CS-g-PDLLA/PDLLA Porous Scaffolds in Supercritical Carbon Dioxide

Preparation of Highly Porous Interconnected Poly(Lactic Acid) Scaffolds Based on A Novel Dynamic Elongational Flow Procedure

Controllable Fabrication of Porous PLGA/PCL Bilayer Membrane for GTR Using Supercritical Carbon Dioxide Foaming

A Novel Route to the Generation of Porous Scaffold Based on the Phase Morphology Control of Co-Continuous Poly(ε-Caprolactone)/polylactide Blend in Supercritical CO 2

Impact of foaming air on melting and crystallization behaviors of microporous PLA scaffolds

Preparation of magnetic scaffolds via supercritical carbon dioxide foaming process using iron oxide nanoparticles coated with CO2‐philic materials as nucleating agents

Fabrication of 3D-Printed Biodegradable Porous Scaffolds Combining Multi-Material Fused Deposition Modeling and Supercritical CO2 Techniques

High-performance Porous PLLA-based Scaffolds for Bone Tissue Engineering: Preparation, Characterization, and in Vitro and in Vivo Evaluation

Foaming of PCL-Based Composites Using scCO2—Biocompatibility and Evaluation for Biomedical Applications

Preparation of Porous Plga/Ha/Collagen Scaffolds with Supercritical Co2 and Application in Osteoblast Cell Culture

Development of a Novel Low-Temperature Deposition Machine Using Screw Extrusion to Fabricate Poly(l-Lactide-co-glycolide) Acid Scaffolds.