Abstract:The work reported in this paper was aimed at exploring the advantages of using supercritical carbon dioxide (scCO2) as an environmentally benign solvent and swelling agent for carrying out the free radical grafting process of vinyl monomers onto isotactic polypropylene (PP) in the solid state. Methyl methacrylate (MMA) was chosen as a grafting monomer. Results showed several scientifically interesting and industrially relevant advantages of the scCO2 assisted solid-state grafting process over a classical solid-state or melt process. First, compared to a classical solid-state grafting process the overall reaction rate of the scCO2 assisted one became less diffusion-controlled and more reactioncontrolled because of enhanced diffusion of the grafting monomer MMA and initiator in the PP. Second, the CO2 pressure itself constituted an additional and sensitive process parameter capable of significantly modifying the monomer grafting yield and the product quality. Third, the scCO2 assisted solid-state process produced much higher MMA grafting contents and longer MMA grafts than the classical solid-state and melt processes did. Introduction Owing to its intrinsic properties such as low cost, versatility and growing applications, PP has become one of the largest and fastest growing thermoplastics. However, its hydrophobic nature limits its applications in systems composed of polar polymers and inorganic fillers such as dyeing, printing, and adhesion, etc. To overcome these limitations, the free-radical grafting of polar monomers onto PP has become a widely used post-polymerization method for functionalizing PP without significantly changing the molecular architecture of the PP backbone as well as the intrinsic properties of PP. [1] In this work, using methyl methacrylate (MMA) as the grafting monomer, we explore the advantages of using scCO2 as an environmentally benign solvent and swelling agent for carrying out the grafting process onto isotactic polypropylene (iPP) over those of conventional grafting processes, such as solution process, melt process and solidstate process. For example, a solution process suffers from the problem of using and subsequently removing organic solvents from the final product. A melt process faces problems associated with low MMA grafting contents. The main problem with a solid-state process is that the grafting reaction is controlled by the diffusion of the monomer into the bulk of the polymer and that the final product is often heterogeneous. These drawbacks may be overcome by the use of scCO2. Besides environmental benignity, we have shown that the CO2 pressure is an extra process parameter capable of easily regulating and controlling the grafted content of polar monomers like maleic anhydride onto PP. [2, 3] For scCO2 assisted solid-state grafting process of MMA onto PP, the effects of various factors on the grafted content and on changes in the molecular-scale and microscale structures of the resulting PP were investigated. Those factors included the reaction operation mode, reaction temperature, reaction time, monomer and initiator concentrations, and scCO2 pressure. Results showed that the scCO2-assisted solid-state grafting process of MMA onto PP did have some scientifically interesting and industrially relevant advantages over the classical solid-state or melt process. Among them, it is worth pointing out that the CO2 pressure itself constituted an additional and sensitive process parameter capable of significantly modifying the overall reaction pathway and the product quality. For example, it could regulate the grafted content with ease. Under scCO2, the diffusion controlled grafting reaction could become a reaction

New Insight into the Action of Supercritical Carbon Dioxide for Grafting of Maleic Anhydride Onto Isotactic Polypropylene by Reactive Extrusion

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Supercritical Carbon Dioxide Assisted Solid-State Grafting Process of Maleic Anhydride Onto Polypropylene

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Graft Copolymerization of Polypropylene by Maleic Anhydride with the Assistant of Supercritical CO_2

Modelling of the Kinetics of the Supercritical CO2 Assisted Grafting of Maleic Anhydride Onto Isotactic Polypropylene in the Solid State

Solid-state grafting of methyl methacrylate onto polypropylene under supercritical carbon dioxide

GRAFTING OF MALEIC ANHYDRIDE ONTO HYPERBRANCHED POLYETHYLENE AND SUPPRESSION OF CHAIN DEGRADATION AND CROSSLINKING SIDE REACTIONS

Grafting of Polypropylene with N-Cyclohexylmaleimide and Styrene Simultaneously Using Supercritical Co2

Supercritical Carbon Dioxide-Assisted Preparation of Polypropylene Grafted Acrylic Acid with High Grafted Content and Small Gel Percent

Supercritical Carbon Dioxide-Assisted Reactive Extrusion for Preparation Long-Chain Branching Polypropylene and Its Rheology

Structure and Mechanism of Functional Isotactic Polypropylene Via in Situ Chlorination Graft Copolymerization

Preparation and Characterization of High Melt Strength Polypropylene with Long Chain Branched Structure by the Reactive Extrusion Process

Melt-grafting of Maleic Anhydride and Styrene Onto Polypropylene

A new strategy for preparation of long-chain branched polypropylene via reactive extrusion with supercritical CO 2 designed for an improved foaming approach

Thermodynamic behavior and crystal structure of polypropylene treated with supercritical carbon dioxide

Reactive Extrusion Grafting of Glycidyl Methacrylate onto Low-Density and Recycled Polyethylene Using Supercritical Carbon Dioxide

Supercritical Carbon Dioxide‐induced Melting Temperature Depression and Crystallization of Syndiotactic Polypropylene

Supercritical Carbon Dioxide Assisted Synthesis of Amphiphilic Graft Copolymers Based on Poly(styrene- Co -Maleic Anhydride) with Methoxyl Poly(ethylene Glycol) Side Chains

A New Method for Preparing Anhydride Grafted Polypropylene with High Grafting Ratio by Combining Microwave Reaction and Reactive Extrusion