Abstract:The work reported in this paper was aimed at exploring the advantages of using supercritical carbon dioxide (scCO2) as an environmentally benign solvent and swelling agent for carrying out the free radical grafting process of vinyl monomers onto isotactic polypropylene (PP) in the solid state. Methyl methacrylate (MMA) was chosen as a grafting monomer. Results showed several scientifically interesting and industrially relevant advantages of the scCO2 assisted solid-state grafting process over a classical solid-state or melt process. First, compared to a classical solid-state grafting process the overall reaction rate of the scCO2 assisted one became less diffusion-controlled and more reactioncontrolled because of enhanced diffusion of the grafting monomer MMA and initiator in the PP. Second, the CO2 pressure itself constituted an additional and sensitive process parameter capable of significantly modifying the monomer grafting yield and the product quality. Third, the scCO2 assisted solid-state process produced much higher MMA grafting contents and longer MMA grafts than the classical solid-state and melt processes did. Introduction Owing to its intrinsic properties such as low cost, versatility and growing applications, PP has become one of the largest and fastest growing thermoplastics. However, its hydrophobic nature limits its applications in systems composed of polar polymers and inorganic fillers such as dyeing, printing, and adhesion, etc. To overcome these limitations, the free-radical grafting of polar monomers onto PP has become a widely used post-polymerization method for functionalizing PP without significantly changing the molecular architecture of the PP backbone as well as the intrinsic properties of PP. [1] In this work, using methyl methacrylate (MMA) as the grafting monomer, we explore the advantages of using scCO2 as an environmentally benign solvent and swelling agent for carrying out the grafting process onto isotactic polypropylene (iPP) over those of conventional grafting processes, such as solution process, melt process and solidstate process. For example, a solution process suffers from the problem of using and subsequently removing organic solvents from the final product. A melt process faces problems associated with low MMA grafting contents. The main problem with a solid-state process is that the grafting reaction is controlled by the diffusion of the monomer into the bulk of the polymer and that the final product is often heterogeneous. These drawbacks may be overcome by the use of scCO2. Besides environmental benignity, we have shown that the CO2 pressure is an extra process parameter capable of easily regulating and controlling the grafted content of polar monomers like maleic anhydride onto PP. [2, 3] For scCO2 assisted solid-state grafting process of MMA onto PP, the effects of various factors on the grafted content and on changes in the molecular-scale and microscale structures of the resulting PP were investigated. Those factors included the reaction operation mode, reaction temperature, reaction time, monomer and initiator concentrations, and scCO2 pressure. Results showed that the scCO2-assisted solid-state grafting process of MMA onto PP did have some scientifically interesting and industrially relevant advantages over the classical solid-state or melt process. Among them, it is worth pointing out that the CO2 pressure itself constituted an additional and sensitive process parameter capable of significantly modifying the overall reaction pathway and the product quality. For example, it could regulate the grafted content with ease. Under scCO2, the diffusion controlled grafting reaction could become a reaction

Grafting of Polypropylene with N-Cyclohexylmaleimide and Styrene Simultaneously Using Supercritical Co2

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

New Insight into the Action of Supercritical Carbon Dioxide for Grafting of Maleic Anhydride Onto Isotactic Polypropylene by Reactive Extrusion

Preparation of Isotactic Polypropylene-Grafted Multiwalled Carbon Nanotubes (Ipp-G-mwnts) by Macroradical Addition in Solution and the Properties of Ipp-G-Mwnts/Ipp Composites

Graft Copolymerization of Polypropylene by Maleic Anhydride with the Assistant of Supercritical CO_2

Supercritical Carbon Dioxide Assisted Solid-State Grafting Process of Maleic Anhydride Onto Polypropylene

Solid-state grafting of methyl methacrylate onto polypropylene under supercritical carbon dioxide

Preparation and properties of polypropylene modified by grafting styrene

Foaming behavior of isotactic polypropylene in supercritical CO2 influenced by phase morphology via chain grafting

Study of Melt Free Radical Grafting of Maleic Anhydride and Styrene Onto Polypropylene and Its Properties

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Supercritical Carbon Dioxide-Assisted Preparation of Polypropylene Grafted Acrylic Acid with High Grafted Content and Small Gel Percent

Solid State Grafting Polymerization of Styrene and Ethyl Acrylate onto Polypropylene

Synthesis and Characterization of Solid-Phase Graft Copolymer of Polypropylene with Styrene and Maleic Anhydride

Surface Functionalization Of Polypropylene-Bearing Isocyanate Groups In Solid State And Their Cyclotrimerization With Diisocyanates

Study of multi-monomer melt-grafting onto polypropylene in an extruder

Preparation of Long Chain Branched Pp Via Multi-Monomer Melt Grafting in the Presence of Bi-Functional Monomer 1,6-Hexanediol Diacrylate

Structure and Mechanism of Functional Isotactic Polypropylene Via in Situ Chlorination Graft Copolymerization

Structure and Rheological Properties of the Products of Solid-State Graft Polymerization of Styrene in Annealed Polypropylene Reactor Granules

High-performance and functional fully bio-based polylactic acid/polypropylene carbonate blends by in situ multistep reaction-induced interfacial control