Abstract:ABSTRACTThe cyclotrimerization of methylene diphenyl 4,4‐diisocyanate (MDI) and 3‐isopropenyl‐α,α′‐dimethylbenzene isocyanate (TMI) was applied on the bead/membrane surfaces of a polypropylene (PP)‐bearing isocyanate group to synthesize a protective networked polymer. Chemical structures of these molecules were characterized through attenuated total reflectance–Fourier transform infrared spectroscopy. Results showed that the absorption peak of isocyanate group at 2255 cm−1 became negligible after the reaction was completed. The absorption peaks of the isocyanurate groups appeared simultaneously at 1600 cm−1 and at 1510–1560 cm−1; this result indicated that the grafted isocyanates were almost consumed, thereby forming isocyanurates. Energy X‐ray dispersive spectroscopy revealed that oxygen content increased; indeed, isocyanurate was formed on the PP surface. Pure PP beads, PP‐g‐TMI, and cyclotrimerization products were also subjected to thermal property tests to investigate their corresponding thermal stabilities. Cyclotrimerization could result in the increase in PP‐grafted decomposition temperature, even slightly higher than pure PP. Rheological behavior in oscillatory flow was also evaluated; the storage modulus, loss modulus, and complex viscosity of cyclotrimerization products were higher than those of the PP‐grafted membranes. Surface morphology was further observed through field‐emission scanning electron microscopy and atomic force microscopy. The cyclotrimerization products contained blocks and exhibited a rough surface. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43327.

Surface Functionalization Of Polypropylene-Bearing Isocyanate Groups In Solid State And Their Cyclotrimerization With Diisocyanates

Synthesis and characterization of temperature responsive graft copolymers of dextran with poly(N-isopropylacrylamide)

The Effect of Tunable Modification Parameters on the Structure and Properties of Polypropylene with Cyclotrimerization Surface of Isocyanates

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Preparation of Isotactic Polypropylene-Grafted Multiwalled Carbon Nanotubes (Ipp-G-mwnts) by Macroradical Addition in Solution and the Properties of Ipp-G-Mwnts/Ipp Composites

Solvothermal Process for Synthesis of Macromolecules Compatibilizer of Polypropylene Containing Isocyanate Ester Groups

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Grafting of Polypropylene with N-Cyclohexylmaleimide and Styrene Simultaneously Using Supercritical Co2

A Novel Method for Functionalization of Polypropylene with Oligomer of Glycidyl Methacrylate: Characterization of Copolymers

In Situ Compatibilization of Polypropylene and Polystyrene-Grafted Nano-Sized TiO2 in the Presence of Friedel–Crafts Catalyst

A Facile, Green, Versatile Protocol To Prepare Polypropylene-G-Poly(Methyl Methacrylate) Copolymer By Water-Solid Phase Suspension Grafting Polymerization Using The Surface Of Reactor Granule Technology Polypropylene Granules As Reaction Loci

Surface Grafting Polymerization of Acrylonitrile Onto Polypropylene Film

Preparation and properties of polypropylene modified by grafting styrene

Surface functionalization of polypropylene film via UV-induced photografting of N-vinylpyrrolidone/maleic anhydride binary monomers

Melt Grafting of Vinyltrimethoxysilane and Water Crosslinking of Polypropylene/Ethylene-Propylene Diene Terpolymer Blends

Surface Photografting Polymerization of Binary Monomers Maleic Anhydride and n -Butyl Vinyl Ether on Polypropylene Film I. Effects of Principal Factors

Preparation of Polypropylene and Polystyrene with NCO and NH2 Functional Groups and Their Applications in Polypropylene/polystyrene Blends

Grafting copolymerization of N,N-dimethyacrylaminoethylmethacrylate (DMAEMA) onto preirradiated polypropylene films

Preparation of Temperature-Sensitive Polymer Films by Surface Photografting Techniques

Study of Maleic Anhydride and Styrene Grafted Onto Polypropylene Induced by UV Irradiation

Reaction kinetics and properties of MDI base poly (urethane-isocyanurate) network polymers