Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

In Situ Compatibilization of Polypropylene and Polystyrene-Grafted Nano-Sized TiO2 in the Presence of Friedel–Crafts Catalyst

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

TiCl4 Immobilized on a Composite Support SiO2/MgCl2·x(1,4‐butanediol)/poly[styrene‐co‐(acrylic Acid)] for Ethylene Polymerization: the Barrier Effect of Poly[styrene‐co‐(acrylic Acid)]

In situ compatibilization of polystyrene/polyolefin elastomer blends by the Friedel-Crafts alkylation reaction

Study on nano TiO2 grafted with polystyrene and its resistance to UV aging

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Structure and properties of in situ compatibilized polystyrene/polyolefin elastomer blends

Mechanism of in situ compatibilization and degradation by friedel-crafts alkylation reaction for polymer blends

Preparation of Polypropylene and Polystyrene with NCO and NH2 Functional Groups and Their Applications in Polypropylene/polystyrene Blends

Preparation of Polypropylene/acrylonitrile–styrene Copolymer Alloys by One‐step Reactive Blending

Degradation and Thermal Properties of in Situ Compatibilized Ps/Poe Blends

Synthesis of Polypropylene- Grafted Graphene and Its Compatibilization Effect on Polypropylene/ Polystyrene Blends

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Functionalization of Polypropylene by TiO2 Photocatalytic Nanoparticles: On the Importance of the Surface Oxygen Plasma Treatment

Functionalization of Polypropylene and Compatibilization of Polypropylene/Nylon 6 Blends with Copolymers Containing Alpha-Methyl Styrene Units

Preparation Of Polypropylene/Acrylonitrile-Styrene Copolymer Alloys By One-Step Reactive Blending

Facile Fabrication of Polyolefin/Carbon Nanotube Composites Via in Situ Friedel-Crafts Polyalkylation: Structure and Properties

Synthesis of graft copolymer of polystyrene and polyamide 6 by activated anionic polymerization

In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction

Effects of the Competition Between Grafting Reaction and Decomposition on the Miscibility and Rheological Behaviors of PS/POE Blends in the Presence of AlCl3