Abstract:The compatibilization of polypropylene/acrylonitrile-styrene (PP/AS) blends through the addition of peroxide (DCP) was investigated in this study. The grafting reaction between PP and AS with the addition of peroxide occurred during the reactive-blending process. The in situ-formed grafting copolymers of PP-g-AS and AS-g-PP were then characterized by FTIR. The optimum concentration of the initiator, DCP, was 0.2 wt %, and the reaction temperature should be above 195 degreesC. It was found that, when AS was the major component of the blends, the grafting of AS onto PP was the main process; conversely, when PP was the major component, PP was grafted onto AS. These results can be explained by the main-chain scission of PP during the reactive-blending process. With increase of the AS component, the total degree of grafting increased at first and then decreased after the composition of the blends reached 50/50. The maximum degree of grafting was found to be 6 wt % for the 50/50 PP/AS/DCP blend. PP was more degradable than was AS in the presence of peroxide at high temperatures. The MFR values of the PP/AS/DCP blends were slightly greater than were those of the simple PP/AS blends, which means that blending is an effective way to protect PP from degradation. SEM micrographs of the cross section of PP/AS/ DCP showed a fine dispersion and a smaller domain size of the dispersed-phase particles, implying that the in situ-formed grafting copolymers act as a compatibilizer to reduce the interfacial tension between the PP and AS phases. (C) 2001 John Wiley & Sons, Inc.

In situ compatibilization of polystyrene/polyolefin elastomer blends by the Friedel-Crafts alkylation reaction

Structure and properties of in situ compatibilized polystyrene/polyolefin elastomer blends

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Mechanism of in situ compatibilization and degradation by friedel-crafts alkylation reaction for polymer blends

In Situ Compatibilization of Polypropylene and Polystyrene-Grafted Nano-Sized TiO2 in the Presence of Friedel–Crafts Catalyst

Effects of the Competition Between Grafting Reaction and Decomposition on the Miscibility and Rheological Behaviors of PS/POE Blends in the Presence of AlCl3

Degradation and Thermal Properties of in Situ Compatibilized Ps/Poe Blends

Structure-property Relationships of Reactively Compatibilized PHB/EVA/starch Blends.

A Novel Strategy for the Preparation of Reactively Compatibilized Polymer Blends with Oligomers Containing Α‐methyl Styrene Units

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Reactive Compatibilization and Properties of Recycled Poly(Ethylene Terephthalate)/Poly(Ethylene-Octene) Blends

Preparation of Polypropylene/acrylonitrile–styrene Copolymer Alloys by One‐step Reactive Blending

Preparation of Polypropylene and Polystyrene with NCO and NH2 Functional Groups and Their Applications in Polypropylene/polystyrene Blends

Preparation Of Polypropylene/Acrylonitrile-Styrene Copolymer Alloys By One-Step Reactive Blending

Fabrication of poly(ethylene terephthalate)/polypropylene-based elastomer blends with balanced stiffness-toughness: The effect of reactive compatibilization

Preparation of POE/PS Blends with Fine Particle Sizes by Diffusion and Subsequent Polymerization of Styrene in POE Pellets

Mechano Chemical Compatibilization of Polyethylene with Graphite by Means of a Suitable Ester

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Super Tough PA6/PP/ABS/SEBS Blends Compatibilized by a Combination of Multi-Phase Compatibilizers

Polyethylene-octene Elastomer/starch Blends: Miscibility, Morphology and Mechanical Properties

In Situ Reactive Interfacial Compatibilization of Poly(Ethylene Terephthalate)/Metallocene Polyethylene Blends