Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Degradation and Thermal Properties of in Situ Compatibilized Ps/Poe Blends

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Structure and properties of in situ compatibilized polystyrene/polyolefin elastomer blends

Mechanism of in situ compatibilization and degradation by friedel-crafts alkylation reaction for polymer blends

In situ compatibilization of polystyrene/polyolefin elastomer blends by the Friedel-Crafts alkylation reaction

Effects of the Competition Between Grafting Reaction and Decomposition on the Miscibility and Rheological Behaviors of PS/POE Blends in the Presence of AlCl3

Blending Properties of Polyethylene Blends Obtained by Hybrid Catalyst on Composite Support

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

In Situ Compatibilization of Polypropylene and Polystyrene-Grafted Nano-Sized TiO2 in the Presence of Friedel–Crafts Catalyst

Crystallization Behavior of Reactive Blends Between Pbs and Pa6icot

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Physical and degradation properties of binary or ternary blends composed of poly (lactic acid), thermoplastic starch and GMA grafted POE

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Compatibility and degradation of novel polyphosphazene/polyanhydride blends

Preparation of Polypropylene/acrylonitrile–styrene Copolymer Alloys by One‐step Reactive Blending

Efficiency of Graft Copolymers at Stabilizing Co-Continuous Polymer Blends During Quiescent Annealing

In vitro enzymatic degradation of the PTMC/cross-linked PEGDA blends

Thermal degradation and spectroscopy characterizations of TPS/PBAT blends irradiated by Cobalt-60 source

Thermal evolution behavior of solution-cast film of PPO/PS blends

Influences of Compatibilization and Compounding Process on Electrical Conduction and Thermal Stabilities of Carbon Black‐filled Immiscible Polypropylene/polystyrene Blends