Abstract:Reactive blending, called also as in-situ compatibilization or reactive compatibilization, involving interfacial reactions leading to the in-situ formation of graft or block copolymer as compatibizers is an efficient route to create new materials that combines the desirable properties of each blend composition. It is very challenging to investigate a reactive blending process because both mixing and interfacial reactions between reactive polymers are highly coupled. Most importantly, the amount of the in-situ formed copolymer is often so low that it is very difficult to determine it in a relatively accurate manner. For this reason, a new concept called reactive compatibilizer-tracer, which bears reactive groups capable of reacting with its counterpart upon forming a copolymer for in-situ compatibilization of a reactive polymer blend and at the same time fluorescent labels allowing determining very small amounts of the in-situ formed compatibilizer was developed in this work. A copolymer of styrene (St) and 3-isopropenyl-alpha,alpha'-dimethylbenzene isocyanate (TMI) (PS-co-TMI) with fluorescent group as a reactive compatibilizer-tracer for the polymer blend composed of polystyrene (PS) as a matrix and polyamide (PA6) as a dispersed phase was used to study their interfacial reaction and morphology development. Contrary to common wisdom, although the interfacial reaction still increases, the dispersed phase domain size first decreases and then increases as mixing time. It is attributed to the two roles mixing played in the reactive polymer blend. In the early stage of mixing, mixing increases the collision between two reactive polymers which is useful for the morphology development. However, the in-situ formed copolymer is only physically held at the interface. In the latter period of mixing, mixing could pull the in-situ copolymer out of the interface, leading to the in-situ formed copolymer losing its efficiency and the coalescence of the dispersed phase.

A Novel Strategy for the Preparation of Reactively Compatibilized Polymer Blends with Oligomers Containing Α‐methyl Styrene Units

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

A Dissipative Particle Dynamics Study on the Compatibilizing Process of Immiscible Polymer Blends with Graft Copolymers

Effect of Mixing Protocol on Compatibilized Polymer Blend Morphology

Functionalization of Polypropylene and Compatibilization of Polypropylene/Nylon 6 Blends with Copolymers Containing Alpha-Methyl Styrene Units

Novel Strategy for Ternary Polymer Blend Compatibilization

Preparation of Polypropylene and Polystyrene with NCO and NH2 Functional Groups and Their Applications in Polypropylene/polystyrene Blends

Preparation of Polypropylene/acrylonitrile–styrene Copolymer Alloys by One‐step Reactive Blending

Compatibilization and morphology development of immiscible ternary polymer blends

Compatibilization And Toughening Of Immiscible Ternary Blends Of Polyamide 6, Polypropylene (Or A Propylene-Ethylene Copolymer), And Polystyrene

Preparation Of Polypropylene/Acrylonitrile-Styrene Copolymer Alloys By One-Step Reactive Blending

FUNCTIONALIZATION OF POLYPROPYLENE AND COMPATIBILIZATION OF POLYPROPYLENE/NYLON 6 BLENDS WITH Α-Methyl STYRENE/STYRENE/MALEIC ANHYDRIDE TERNARY COPOLYMER

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Studies on blends of LLDPE and polar polymers compatibilized by a random copolymer

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Reactive Compatibilization of Polyamide 6/Olefin Block Copolymer Blends: Phase Morphology, Rheological Behavior, Thermal Behavior, and Mechanical Properties

Concept of Reactive Compatibilizer-Tracer for Discovering Interfacial Reaction and Morphology Development for In-Situ Compatibilizing Blending Processes

Structure and properties of in situ compatibilized polystyrene/polyolefin elastomer blends

A Novel Method for Functionalization of Polypropylene with Oligomer of Glycidyl Methacrylate: Characterization of Copolymers

High-reactive Silica Nanosheets As Compatibilizers for Immiscible PLLA/PBAT Polymer Blends