Abstract:Diffusion and polymerization behaviour of styrene (St) in commercially. available high density polyethylene (HDPE) pellets were studied and HDPE/PS nanoblend pellets were synthesized. Both the diffusion and polymerization steps were carried out in water medium. At 70 - 90 degrees C, diffusion behaviour of St towards HDPE pellets showed features of Fickian Diffusion. The saturation values of diffused St were different at different diffusion temperatures, and higher diffusion temperature meant higher saturation value, higher diffusion rate and shorter time to reach the saturation value. The amount of the initiator BPO was important in view of PS content in the pellets. With 0. 5 wt% - 1 wt% BPO, PS content was 11 wt% when diffusion and polymerization were carried out at 90 degrees C, while the PS content increased to about 16 wt% when excess amount of BPO (5 wt%) was used. The diametrical distribution of PS was investigated by Micro Fourier Transform Infrared Spectroscopy, showing that PS appeared throughout the HDPE pellets. PS distributions along the diameters of the pellets showed similar "M" shape curves for HDPE/PS pellets synthesized with different amounts of BPO. The peaks of the curves appeared at 200 mu m area to the surface and were related to crystalline structure of HDPE pellets. The phase morphology of PS in the blend pellets were characterized by field emission scanning electron microscopy. Typical sea. island morphology was revealed with an average particle size of less than 100 nm. The HDPE/PS blend pellets were melt. processed into cylindrical bars. PS phases in the extrusion bars of the blend pellets synthesized with 0. 5 wt% BPO showed Ci Rice morphology, reflecting that PS particles were aggregating instead of coalescing during processing, and particle sizes were from tens of nm to 200 nm. The disperse PS phase and HDPE matrix had good interaction and the HDPE/PS bars did not break with elongation of 600% and showed higher tensile stress than pure HDPE bars, which meant that 0. 5 wt% BPO was fairly good condition for preparing HDPE/PS nanoblends or other modified HDPE materials.

Preparation of POE/PS Blends with Fine Particle Sizes by Diffusion and Subsequent Polymerization of Styrene in POE Pellets

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Particle morphology of syndiotactic polystyrene prepared with homogeneous metallocene catalyst

Preparation of monodisperse polystyrene particles and assembly of spherical colloidal crystals

Diffusion and Polymerization Behavior of Styrene in High Density Polyethylene Pellets

Polypropylene/Polystyrene Blends Prepared by Diffusion and Subsequent Polymerization in Polypropylene Pellets after Injection Molding

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Preparation of Pp/Poe/Ps Ternary Alloys Via Diffusion and Polymerization of Styrene in Pp/Poe Alloys

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

Diffusion and Polymerization Behavior of Styrene in Polypropylene Pellets of Different Aggregation State

A Novel Synthetic Method for Preparing Poly(2,6-Dimethyl-1,4-phenylene Oxide)/polystyrene Alloy in Reactor Containing Aqueous Medium

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Preparation and Properties of Ethylene Octane Copolymer Blends with High Strength and Polarity

Morphology and Mechanical Properties of Polyamide 6/Polystyrene Blends Prepared by Diffusion and Subsequent Polymerization of Styrene in Polyamide 6 Pellets

Diffusion and Polymerization Behavior of Styrene in Polyethylene Pellets of Different Molecular Structures

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Preparation of Polyamide 6/polystyrene Quasi‐nanoblends by Diffusion and Subsequent Polymerization of Styrene in Water‐sorbed Polyamide 6 Pellets

Preparation of Isotactic Polypropylene/Polystyrene Blends by Diffusion and Subsequent Polymerization of Styrene in Isotactic Polypropylene Pellets

Reactive blend of epoxy-novolac resin and epoxide-terminated low-molecular-weight poly(phenylene oxide)

Preparation of Polypropylene/Poly（styrene-co-（butyl Methacrylate）） Nanoblends by Diffusion and Subsequent Copolymerization of Monomers in Isotactic Polypropylene Pellets

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend