Abstract:Tissue engineering holds great promise as an alternative strategy to current treatment modalities of diseased or otherwise failed tissues. Most strategies of tissue engineering rely on three-dimensional porous scaffolds to mimic the natural extracellular matrix (ECM) as templates onto which cells attach, multiply, migrate and function. When cells are harvested from a donor and seeded, scaffolds facilitate the organization of these cells into a three-dimensional architecture, control cell behavior and subsequently direct the formation of organ-specific tissue. In view of its role, scaffold fabrication methods target the creation of highly porous and interconnected pore structures. Among the different scaffolds fabrication methods explored, solvent casting followed by precipitation or particulate leaching is one of the most straightforward methods. In this paper, we conducted a comparative study of two methods to prepare spherical porogens using poly(vinyl pyrrolidone) (PVP) and poly(vinyl alcohol) (PVA) as dispersing agents and we used these porogens to fabricate cylindrical porous scaffolds using a combination of pressure differential and solvent casting/particulate leaching method. Porogen particle size analyses showed that at 0.6% dispersing agent concentration, PVP produced smaller particles with narrower distribution (100-300 mum) than poly(vinyl alcohol) (100-500 mum) presumably due to the fast adsorption kinetics of the former. Scaffolds fabricated from PVP-stabilized porogens had higher open porosities and high pore interconnectivity than those based on porogens prepared using PVA stabilizer. Preliminary cell culture work also showed that scaffolds fabricated using PVP-stabilized porogens support attachment and spreading of human coronary artery smooth muscle cells (HCASMC) better than the PVA counterparts. This is the first time that such direct comparative studies on the porogen preparation methods and its effect on the scaffold porosity and cell attachment property is reported.

A method for solvent-free fabrication of porous polymer using solid-state foaming and ultrasound for tissue engineering applications

Microfabrication of 3D-Polymeric Structures Using Soft Lithography for Tissue Engineering

Solvent-assisted room-temperature compression molding approach to fabricate porous scaffolds for tissue engineering.

Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique

Preparation of Highly Porous Interconnected Poly(Lactic Acid) Scaffolds Based on A Novel Dynamic Elongational Flow Procedure

Post-processing of polymer foam tissue scaffolds with high power ultrasound: a route to increased pore interconnectivity, pore size and fluid transport

Fabrication of Three-Dimensional Porous Scaffolds of Complicated Shape for Tissue Engineering. I. Compression Molding Based on Flexible-Rigid Combined Mold.

Polylactide scaffold fabrication using a novel combination technique of fused deposition modeling and batch foaming: dimensional accuracy and structural properties

LOCALIZED MICROSTRUCTURES FABRICATION THROUGH STANDING SURFACE ACOUSTIC WAVE AND USER-DEFINED WAVEGUIDES

A “room-temperature” injection molding/particulate leaching approach for fabrication of biodegradable three-dimensional porous scaffolds

One-Pot Preparation of Hydrophilic Polylactide Porous Scaffolds by Using Safe Solvent and Choline Taurinate Ionic Liquid

Fabrication of 3D-Printed Biodegradable Porous Scaffolds Combining Multi-Material Fused Deposition Modeling and Supercritical CO2 Techniques

Fabrication of "spongy Skin" on Diversified Materials Based on Surface Swelling Non-Solvent-Induced Phase Separation.

Fabrication of highly porous tissue-engineering scaffolds using selective spherical porogens

Fabrication of three dimensional polymeric scaffolds with spherical pores

Biodegradable Polylactic Acid (PLA) Microstructures for Scaffold Applications

Porous Morphology, Porosity, Mechanical Properties Of Poly(Alpha-Hydroxy Acid)-Tricalcium Phosphate Composite Scaffolds Fabricated By Low-Temperature Deposition

Wet 3D printing of biodegradable porous scaffolds to enable room-temperature deposition modeling of polymeric solutions for regeneration of articular cartilage

Microporous polylactic acid/chitin nanocrystals composite scaffolds using in-situ foaming 3D printing for bone tissue engineering

Novel Fabricating Process for Porous Polyglycolic Acid Scaffolds by Melt-Foaming Using Supercritical Carbon Dioxide

Solid Freeform Fabrication of Polycaprolactone∕Hydroxyapatite Tissue Scaffolds