Abstract:3D Ti6Al4V-beta-tricalcium phosphate (TCP) hybrid scaffolds with interconnected porous network and controllable porosity and pore size were successfully produced by three-dimensional fiber deposition (3DF). The macrostructure of scaffolds was determined by the 3D design, whereas the micro- and submicron structure were derived from the Ti6Al4V powder sintering and the crystalline TCP powder, respectively. Ti6Al4V-TCP slurry was developed for 3DF by optimizing the TCP powder size, Ti6Al4V-to-TCP powder ratio and Ti6Al4V-TCP powder content. Moreover, the air pressure and fiber deposition rate were optimized. A maximum achievable ceramic content in the Ti6Al4V-TCP slurry that enables 3DF manufacturing was 10 wt%. The chemical analysis showed that limited contamination occurred during sintering. The compressive strength and Young's modulus of the scaffolds exhibited values between those of cancellous and cortical bone. The 3D Ti6Al4V-TCP scaffolds with 10 wt% TCP allowed deposition of a calcium phosphate layer on the surface in a simulated body fluid. Cumulative release of calcium and phosphate ions from the scaffolds was observed in a simulated physiological solution, in contrast to a cell culture medium. A pilot in vivo study, in which the scaffolds were implanted intramuscularly in dogs showed ectopic bone formation in the Ti6Al4V-TCP scaffolds with 10 wt% TCP, showing their osteoinductive potential. The porous 3D Ti6Al4V-TCP scaffolds developed here combine the mechanical properties of the metal with the bioactivity of the ceramic and are therefore likely to yield more effective strategies to control the implant-bone interface and thereby improve long-term clinical results in orthopaedics and craniomaxillofacial surgery. STATEMENT OF SIGNIFICANCE: In this work, 3D porous hybrid scaffolds made of a titanium alloy and a beta-tricalcium phosphate ceramic (Ti6Al4V-TCP) were developed using the direct additive manufacturing technique 3D fiber deposition. Upon optimization of the powders and slurry, scaffolds with up to 10 wt.% TCP with good mechanical properties and controllable porous structure at different length scales were successfully manufactured. A preliminary in vivo study in an intramuscular model demonstrated that the addition of TCP to the metal alloy improved its bioactivity. The combination of the two materials and the use of a direct additive manufacturing technique resulted in scaffolds that may lead to more effective strategies to control the implant-bone interface and thereby improve long-term clinical results in orthopaedics and craniomaxillofacial surgery.

Porous Morphology, Porosity, Mechanical Properties Of Poly(Alpha-Hydroxy Acid)-Tricalcium Phosphate Composite Scaffolds Fabricated By Low-Temperature Deposition

Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition

Electrospun Composite Poly(L-Lactic Acid)/Tricalcium Phosphate Scaffolds Induce Proliferation and Osteogenic Differentiation of Human Adipose-Derived Stem Cells

Preparation and performance of poly (vinyl alcohol)/polylactic acid/hydroxyapatite composite scaffolds based on 3D printing

Multinozzle low-temperature deposition system for construction of gradient tissue engineering scaffolds.

Preparation of Porous Poly(Lactic Acid)/Tricalcium Phosphate Composite Scaffolds for Tissue Engineering

A Novel Poly (Lactic-Co-Glycolic Acid)-Collagen Hybrid Scaffold Fabricated Via Multi-Nozzle Low-Temperature Deposition

Fabrication of Three-Dimensional Porous Scaffolds of Complicated Shape for Tissue Engineering. I. Compression Molding Based on Flexible-Rigid Combined Mold.

Fabrication of Three-Dimensional Poly(ε-Caprolactone) Scaffolds with Hierarchical Pore Structures for Tissue Engineering

Structural mechanics of 3D-printed poly(lactic acid) scaffolds with tetragonal, hexagonal and wheel-like designs.

Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique

Low-Temperature Deposited Amorphous Poly(aryl ether ketone) Hierarchically Porous Scaffolds with Strontium-Doped Mineralized Coating for Bone Defect Repair.

Mechanical and biological properties of hydroxyapatite/tricalcium phosphate scaffolds coated with poly(lactic-co-glycolic acid)

Precision Extrusion Deposition With Integrated Assisting Cooling To Fabricate 3d Scaffolds

3D porous Ti6Al4V-beta-tricalcium phosphate scaffolds directly fabricated by additive manufacturing

Development of a Novel Low-Temperature Deposition Machine Using Screw Extrusion to Fabricate Poly(l-Lactide-co-glycolide) Acid Scaffolds.

Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting

3D Biocompatible Polyester Blend Scaffolds Containing Degradable Calcium Citrate for Bone Tissue Engineering

Morphologies, mechanical and in vitro behaviors of DLP-based 3D printed HA scaffolds with different structural configurations

Solid Freeform Fabrication of Polycaprolactone∕Hydroxyapatite Tissue Scaffolds

Bone Tissue Scaffold Technologies Based on RP Adopted Droplet Assembly