Abstract:In this paper, fully dense Si3N4/SiC nano-composites were fabricated through polymer-derived ceramics (PDCs) method and spark plasma sintering technique. Polymer-derived SiAlCN ceramic was synthesized by using polysilazane as preceramic precursor, aluminum tri-sec-butoxide as Al source. Then Si3N4/SiC composites with nanometer sized Si3N4 and SiC phases were formed spontaneously during spark plasma sintering through in-situ phase separation of amorphous SiAlCN ceramics. It's found that with the increasement of Al contents, the densification rate was accelerated significantly and serious degradation of Si3N4 phase was avoided by restricting carbothermal reaction. At the same time, Al contained composites show excellent oxidation/corrosion resistance at 1350 °C and 50% H2O - 50% O2 water vapor environment than that of Al free samples. The Si3N4/SiC composites derived from Al contained PDCs overcomes the trade-off between abnormal grain growth and serious degradation of Si3N4 phase, which is a very tough problem for traditional PDC route (without Al) to fabricate Si3N4/SiC composites. For traditional PDC route, (I) if with traditional sintering additives, abnormal grain growth occurs, nano grains cannot be achieved; (II) if without traditional sintering additives, serious degradation of Si3N4 occurs, Si3N4 and SiC composite cannot be formed. Therefore, Al contained polymer-derived ceramics route opens a promising avenue to fabricate Si3N4/SiC nano-composites with fine grain size, uniform microstructure and excellent oxidation/corrosion resistance.

Synthesis of functional ceramic nanocrystals (SiC, TiC, TiN) by arc-discharge plasma process

In Situ Formation of the TiCN Phase in SiBCN Ceramic Aerogels Enabling Superior Thermal and Structural Stability Up to 1800 °C.

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Sic Nanocrystals: High-Rate Deposition and Nano-Scale Control by Thermal Plasma

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Synthesis of Metallic and Ceramic Nanoparticles by Direct-current Arc Plasma

Synthesis of Ultrafine Silicon Carbide Nanoparticles Using Nonthermal Arc Plasma at Atmospheric Pressure

Fabrication of ultra-small SiC nanoparticles with adjustable size, stoichiometry and photoluminescence by AC multi-arc plasmas

Chemical vapor processing and applications for nanostructured ceramic powders and whiskers

Plasma synthesis of titanium nitride, carbide and carbonitride nanoparticles by means of reactive anodic arc evaporation from solid titanium

In situ synthesis of homogeneously dispersed SiC nanowires in reaction sintered silicon-based ceramic powders

Simple Synthesis of Ultrafine Amorphous Silicon Carbide Nanoparticles by Atmospheric Plasmas

Modification of plasma-generated SiC nanoparticles by heat treatment under air atmosphere

In situ formation of Si3N4–SiC nanocomposites through polymer-derived SiAlCN ceramics and spark plasma sintering

Making Nanostructured Ceramics from Micrometer-Sized Powders via Grain Refinement During SPS Sintering

The Synthesis, Structure, Morphology Characterizations and Evolution Mechanisms of Nanosized Titanium Carbides and Their Further Applications

Synthesis Of Sic-Si3n4 Composite Nanoparticles By Laser-Induced Chemical Deposition

Spark plasma sintering of TiN ceramics codoped with SiC and CNT

Structure Transition Mechanism Of Single-Crystalline Silicon, G-C3n4, And Diamond Nanocone Arrays Synthesized By Plasma Sputtering Reaction Deposition

Nonthermal Plasma Synthesis of Metallic Ti Nanocrystals

Vapor-Solid Reaction for Silicon Carbide Hollow Spherical Nanocrystals