Abstract:It has been recently demonstrated that non-thermal plasmas (NTP) can function as nanoparticle processing reactors by selectively heating particles, inducing chemical reactions and structural transformations. However, lacking in prior studies is direct comparison between NTP particle -processing and more traditional, equilibrium thermal processing. With tandem differential mobility analysis, we studied the sintering of metallic nano-aggregates as they traversed through an atmospheric pressure NTP. As a reference, sintering experiments with a tube furnace were also conducted. Silver and bismuth nano-aggregates were synthesized via gas phase reactors for ex-periments and were selected to represent high and low melting point metals, respectively. We found that the silver aggregate sintering behavior was similar in the plasma and the furnace systems. With increasing plasma power/furnace temperature, the sintering process can be divided into to an aggregate compaction stage, a constant mobility stage and a vaporization stage. The mobility size shift of the silver aggregates was used to estimate their equivalent temperatures in the plasma. With an aggregate sintering model, an equivalent particle sintering temperature was estimated to be 165-270 degrees C in the plasma as the silver aggregate mobility diameter decreased from 100 nm to 95-65 nm. In contrast to silver, due to the early onset of particle vaporization, the three stages of bismuth aggregate sintering were not as clearly discernible. The constant mobility stage was only observed in a narrow range of plasma powers for the 100 nm aggregates and was not evident for the 20 nm aggregates. Additionally, distinct patterns of bismuth particle mobility shifts were observed during plasma sintering and furnace sintering, with the plasma reactor being a more effective sintering unit. The reducing environment within the plasma and the partial oxidation of the bismuth aggregates could be the reason for the effectiveness of plasma sintering. Further measurements of the particle transmission efficiency through the plasma reactor shows that it is particle size and material dependent.

Synthesis of Metallic and Ceramic Nanoparticles by Direct-current Arc Plasma

Recent Progresses in Material Fabrication and Modification by Cold Plasma Technique

Flame Synthesis of Carbon and Metal-Oxide Nanoparticles: Flame Types, Effects of Combustion Parameters on Properties and Measurement Methods

Nanosynthesis by atmospheric arc discharges excited with pulsed-DC power: a review

Synthesis of nanostructured materials by hot and cold plasma

Plasma synthesis of titanium nitride, carbide and carbonitride nanoparticles by means of reactive anodic arc evaporation from solid titanium

Synthesis of Ultrafine Silicon Carbide Nanoparticles Using Nonthermal Arc Plasma at Atmospheric Pressure

Carbon Nanomaterials Synthesized by Arc Discharge Hot Plasma

Synthesis of metallic alloy particles on flat graphitic interfaces in arc discharge

Fabrication of Carbon-Coated Aluminum Nanoparticles and Carbon Quantum Dots by Thermal Plasma in Liquid Nitrogen Environment

Research on the influence of arc discharge conditions on the formation of carbon Nano-materials

Synthesis of Silver Nanoparticles Using Large-Area Arc Discharge and Its Application in Electronic Packaging

Syntheses of carbon nanomaterials by radio frequency plasma enhanced chemical vapor deposition

Controlled Synthesis of Different Metal Oxide Nanostructures by Direct Current Arc Discharge.

Growth of metal nanoparticles in hydrocarbon atmosphere of arc discharge

Sintering of Metallic Nano-Aggregates in an Atmospheric Pressure Non-Thermal Plasma

Synthesis of magnetic metal nanoparticles by plasma and magnetic solution reaction

Preparation and Particle Size Characterization of Cu Nanoparticles Prepared by Anodic Arc Plasma

Synthesis mechanism of TiO2 nanoparticles via high frequency electrical arc discharge

Metal nanopowder production by cryogenic mechanical collision and pulsed electric discharge methods