Abstract:With the rapid development of security market, the glass-plastic hybrid lens has gradually become a choice for the special requirements like high imaging quality in a wide temperature range and low cost. The reduction of spherical aberration is achieved by using aspherical surface instead of increasing the number of lenses. Obviously, plastic aspherical lens plays a great role in the cost reduction. However, the hybrid lens has a priority issue, which is the large thermal coefficient of expansion of plastic, causing focus shift and seriously affecting the imaging quality, so the hybrid lens is highly sensitive to the change of temperature. To ensure the system operates normally in a wide temperature range, it is necessary to eliminate the influence of temperature on the hybrid lens system. A practical design method named the Athermal Material Map is summarized and verified by an athermal design example according to the design index. It includes the distribution of optical power and selection of glass or plastic. The design result shows that the optical system has excellent imaging quality at a wide temperature range from -20 degrees C to 70 degrees C. The method of athermal design in this paper has generality which could apply to optical system with plastic aspherical surface.

Aplanatic Zone Plate Embedded in Sapphire

Design of objective lens with reflective spherical Fresnel zone plate

High-Efficiency Spiral Zone Plates in Sapphire

Sapphire-Based Fresnel Zone Plate Fabricated by Femtosecond Laser Direct Writing and Wet Etching

Flat Optical Lens by Use of 90-Degree Volume Holographic Grating Recording Geometry and Nonvolatile Thermal Fixing in LiNbO3:Fe Crystal

Multilevel Phase-Type Diffractive Lens Embedded in Sapphire.

Photorefractive Phase Zone Plates

Fabrication of High Temperature Resistant Geometric Phase Element Inside Sapphire by Femtoesecond Laser

A compact broadband terahertz range quarter-wave plate

Centimeter-Sized Aplanatic Hybrid Diffractive-Refractive Lens

Symmetrical Optical Imaging System with Bionic Variable-Focus Lens for Off-Axis Aberration Correction

Investigation of Quadrate Fresnel Zone Plates Fabricated by Femtosecond Laser Direct Writing

Doublet liquid variable-focus lens for spherical aberration correction

The Realization of Long Focal Depth with A Linear Varied-Area Zone Plate

A zoned two-layer flat lens design

Athermal Design And Analysis Of Glass-Plastic Hybrid Lens

Fibonacci-like Zone Plate

Micro-Buried Spiral Zone Plate in A Lithium Niobate Crystal

Large-Scale High-Accuracy and High-Efficiency Phase Plate Machining

Quasi-single-order focusing zone plate withtrapezoidal transmittance

Mirror-rotation-symmetrical Single-Focus Spiral Zone Plates