Abstract:Flat optics have attracted interest for decades due to their flexibility in manipulating optical wave properties, which allows the miniaturization of bulky optical assemblies into integrated planar components. Recent advances in achromatic flat lenses have shown promising applications in various fields. However, it is a significant challenge for achromatic flat lenses with a high numerical aperture to simultaneously achieving broad bandwidth and expanding the aperture sizes. Here, we present the zone division multiplex of the meta-atoms on a stepwise phase dispersion compensation (SPDC) layer to address the above challenge. In principle, the aperture size can be freely enlarged by increasing the optical thickness difference between the central and marginal zones of the SPDC layer, without the limit of the achromatic bandwidth. The SPDC layer also serves as the substrate, making the device thinner. Two achromatic flat lenses of 500 nm thickness with a bandwidth of 650 - 1000 nm are experimentally achieved: one with a numerical aperture of 0.9 and a radius of 20.1 µm, and another with a numerical aperture of 0.7 and a radius of 30.0 µm. To the best of our knowledge, they are the broadband achromatic flat lenses with highest numerical apertures, the largest aperture sizes and thinnest thickness reported so far. Microscopic imaging with a 1.10 µm resolution has also been demonstrated by white light illumination, surpassing any previously reported resolution attained by achromatic metalenses and multi-level diffractive lenses. These unprecedented performances mark a substantial step toward practical applications of flat lenses.

Centimeter-Sized Aplanatic Hybrid Diffractive-Refractive Lens

3D nanoprinting for fiber-integrated achromatic diffractive lens

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Flat Optical Lens by Use of 90-Degree Volume Holographic Grating Recording Geometry and Nonvolatile Thermal Fixing in LiNbO3:Fe Crystal

Liquid Tunable Diffractive/Refractive Hybrid Lens

Design, Fabrication and Analysis of a Hybrid-Order Monolithic Imaging Diffractive Lens on a Germanium Substrate

Hybrid Achromatic Microlenses with High Numerical Apertures and Focusing Efficiencies Across the Visible

Diffractive Microlens with A Cascade Focal Plane Fabricated by Single Mask Uv-Photolithography and Common Koh:H(2)O Etching

Symmetrical Optical Imaging System with Bionic Variable-Focus Lens for Off-Axis Aberration Correction

Design of Hybrid Refractive-Diffractive Visible Lens with Small F-number

Varifocal diffractive lens based on microfluidics

Design, Manufacture and Properties of High-Definition Diffractive Objective Lens

Multilevel Phase-Type Diffractive Lens Embedded in Sapphire.

Shortening Focal Length of 100‐mm Aperture Flat Lens Based on Improved Sagnac Interferometer and Bifacial Liquid Crystal

Optical-digital joint design of multi-order diffractive lenses for lightweight high-resolution computational imaging

Design of a Hybrid Refractive/Diffractive Lens System for Broadband UV

Fiber-integrated Hybrid Achromatic Microlenses by Combined Femtosecond Laser 3D Printing

Hybrid Singlet Lens Applied To Visible Telescope Objective Design

High-Performance Achromatic Flat Lens by Multiplexing Meta-Atoms on a Stepwise Phase Dispersion Compensation Layer

Design of a Refractive/Diffractive Hybrid Middle Infrared Continuous Zoom Optical System

A High-Resolution Hybrid Lens