Abstract:The polarization modulator unit for the low-frequency telescope in LiteBIRD employs an achromatic half-wave plate (AHWP). It consists of five layers of a-cut sapphire plate, which are stacked based on a Pancharatnam recipe. In this way, the retardance of the AHWP is a half-wave over a bandwidth of 34-161 GHz. The diameter of a single sapphire plate is about 500 mm and the thickness is 5 mm. When a large diameter AHWP is used for a space mission, it is important for the AHWP to survive launch vibration. A preliminary study indicates that the five-layer stacked HWP has a risk of breakage at the launch unless the five layers are glued together and mechanically treated as one disk. We report our investigation using a sodium silicate solution that can bond the sapphire plates. This technique has been previously investigated as a candidate of cryogenic bonding for a mirror material, including sapphire, of the gravitational wave experiments: LIGO, VIRGO, and KAGRA. We experimentally studied the mechanical strength of the bonded interface for two different surface conditions: polished and unpolished. We demonstrated that the tensile and shear strength > 20 MPa for samples with a polished surface. This satisfied the requirement of 5.5 MPa derived from the mechanical simulation assuming a launch load of 30G. We identified that samples glued on a polished surface exhibit higher strength than unpolished ones by a factor of 2 for tensile and 18 for shear strength. We measured the millimeter-wave transmittance between 90 and 140 GHz using sapphire plates with a diameter of 50 mm before and after bonding. We did not find any optical effects caused by the bonded interface within 2% error in transmittance, which originates from the measurement system.

A compact broadband terahertz range quarter-wave plate

A Millimeter-Wave Achromatic Half Wave Plate

Comprehensive Design and Calibration of an Even Aspheric Quarter-Wave Plate for Polarization Point Diffraction Interferometry.

Polarization Point Diffraction Interferometry Based on an Even Aspheric Quarter-Wave Plate

Optimised quartz half-wave plate for broadband terahertz operation

Aplanatic Zone Plate Embedded in Sapphire

Metamaterial-based Design for a Half-Wavelength Plate in the Terahertz Range

Design of the ultra-wideband quarter-wave plate with photonic crystal fiber

Broadband Achromatic Quarter-Waveplate Using 2D Hybrid Copper Halide Single Crystals

Quantitative Analysis of Wide Field-of-view and Broadband Quarter-Wave Plate Based on Metasurface

Plasmonic Wave Plate Based on Subwavelength Nanoslits

Birefringent Plate Design for Broadband Spectral Shaping in A Ti : Sapphire Regenerative Amplifier

Study on Broadband Achromatic Quarter-wave Plate by Subwavelength Gratings

Broadband, millimeter-wave anti-reflective structures on sapphire ablated with femto-second laser

Optimization and design on multi-layers of dielectric metasurface as broadband terahertz quarter wave plate

Ultra-wide band reflective metamaterial wave plates for terahertz waves

Mechanical strength and millimeter-wave transmittance spectrum of stacked sapphire plates bonded by sodium silicate solution

Terahertz Wideband Quarter Wave Plate Based on Freestanding Grating Structures

Designed Achromatic Quarter Wave Plates Of Subwavelength Grating Structure

Broadband Terahertz Half-Wave Plate With Multi-Layered Metamaterials Designed via Quantum Engineering

A Broadband Sapphire Disc Pillbox Window for Terahertz Traveling-Wave Tubes