Abstract:This article proposes a novel highly sensitive humidity sensor with temperature compensation, mainly consisting of a special modal interferometer bonded with thick polyimide (PI) solid films. The modal interferometer is constructed by splicing a special dual-mode fiber (DMF) with two sections of regular single mode fiber (SMF), forming an SDS (SMF-DMF-SMF) structure. Due to the particular design of the refractive index of the DMF, only ${\text {LP}}_{{01}}$ and ${\text {LP}}_{{02}}$ modes are transmitted, which causes a unique wavelength (UWL) to appear in the spectrum. The UWL breaks the periodicity of the conventional interferometric spectrum. More importantly, both sides of UWL respond differently to various measurands, which enables the interferometer to measure dual parameters simultaneously. To achieve a higher humidity sensitivity, the thick PI solid films are used for the first time to manufacture the interferometric humidity sensors. Their thickness is at least one order of magnitude greater than that of the PI coating used in the traditional humidity sensors, which enhances the sensor’s response to humidity variation significantly. The performance of the proposed sensor is further improved with the aid of the varied period Vernier effect by paralleling a bare dual modal interferometer based on the SDS structure as a reference. Similar to the sensing modal interferometric spectrum, the output spectrum of the varied period Vernier effect scheme owns the UWL as well, which makes it easy to distinguish the wavelength shifts of the specific peaks to the measurands. The validity of the proposed scheme is verified by an experimental case, where the humidity sensitivity and the temperature sensitivity are achieved as 1044.26 pm/%RH and 1467.99 pm/°C, respectively.

A Miniaturized Evanescent Mode HMSIW Humidity Sensor

Fabrication of Miniaturized CSRR-loaded HMSIW Humidity Sensors with High Sensitivity and Ultra-Low Humidity Hysteresis

A Novel Serial High Frequency Surface Acoustic Wave Humidity Sensor

A novel SAW humidity sensor based on electrosprayed polymerized electrolyte film

A Humidity Sensor Based on a Whispering-Gallery-Mode Resonator with an L-shaped Open Microcavity

A Miniaturized SIW Circular Cavity Resonator for Microfluidic Sensing Applications

Ultrafast Miniature Humidity Sensor Based on Single-Sided Microsphere Resonator

Dual-mode Microring Resonator for Humidity Sensing with Temperature Compensation

A novel surface acoustic wave-impedance humidity sensor based on the composite of polyaniline and poly(vinyl alcohol) with a capability of detecting low humidity

Metamaterial Inspired Miniaturized SIW Resonator for Sensor Applications

Wireless and Passive SAW-Based Humidity Sensor Employing SiO2 Thin Film

Dual-Mode Solidly Mounted Resonator-Based Sensor for Temperature and Humidity Detection and Discrimination

Two Birds with One Stone: Impedance-Voltage Dual-Mode Low Humidity Sensor Based on LiBr-MOF-801 with High Response

A nanowire WO3 humidity sensor integrated with micro-heater and inverting amplifier circuit on chip manufactured using CMOS-MEMS technique

A High Sensitivity Micro-Ring Humidity Sensor Based on U-Shaped Waveguide Coupled Single Micro-Ring Structure

An MMF–HCF Reflective SPR Sensor for Simultaneous Measurement of Temperature and Relative Humidity

Chip-Scale Humidity Sensor Based On A Silicon Nanobeam Cavity

An MMFHCF Reflective SPR Sensor for Simultaneous Measurement of Temperature and Relative Humidity

Highly sensitive humidity measurement with temperature compensation based on a special dual-modal interferometric sensor and varied period Vernier effect

An Excellent Humidity Sensor Made of Surface Acoustic Wave Resonator Coated with MWCNTs/Nafion Composite Material Films

A CMOS Smart Temperature and Humidity Sensor with Combined Readout